target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca953x.dtsi"
   7
   8 / {
   9         keys {
  10                 compatible = "gpio-keys-polled";
  11                 poll-interval = <20>;
  12                 pinctrl-names = "default";
  13                 pinctrl-0 = <&jtag_disable_pins>;
  14
  15                 button0 {
  16                         label = "reset";
  17                         linux,code = <KEY_RESTART>;
  18                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  19                 };
  20
  21                 button1 {
  22                         label = "button right";
  23                         linux,code = <BTN_0>;
  24                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  25                 };
  26
  27                 button3 {
  28                         label = "button left";
  29                         linux,code = <BTN_1>;
  30                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  31                 };
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 usb {
  38                         label = "gl-ar300m:green:usb";
  39                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  40                         trigger-sources = <&hub_port>;
  41                         linux,default-trigger = "usbport";
  42                 };
  43
  44                 wlan {
  45                         label = "gl-ar300m:green:wlan";
  46                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "phy0tpt";
  48                 };
  49
  50                 lan {
  51                         label = "gl-ar300m:green:lan";
  52                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 status {
  56                         label = "gl-ar300m:green:status";
  57                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60 };
  61
  62 &pcie0 {
  63         status = "okay";
  64 };
  65
  66 &uart {
  67         status = "okay";
  68 };
  69
  70 &usb0 {
  71         #address-cells = <1>;
  72         #size-cells = <0>;
  73         status = "okay";
  74
  75         hub_port: port@1 {
  76                 reg = <1>;
  77                 #trigger-source-cells = <0>;
  78         };
  79 };
  80
  81 &usb_phy {
  82         status = "okay";
  83 };
  84
  85 &eth0 {
  86         status = "okay";
  87         mtd-mac-address = <&art 0x0>;
  88         phy-handle = <&swphy4>;
  89 };
  90
  91 &eth1 {
  92         mtd-mac-address = <&art 0x6>;
  93 };
  94
  95 &wmac {
  96         status = "okay";
  97         mtd-cal-data = <&art 0x1000>;
  98         mtd-mac-address = <&art 0x1002>;
  99 };