target/linux/ath79/dts/qca9531_glinet_gl-x750.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "glinet,gl-x750", "qca,qca9531";
  11         model = "GL.iNet GL-X750";
  12
  13         keys {
  14                 compatible = "gpio-keys-polled";
  15
  16                 poll-interval = <20>;
  17                 pinctrl-names = "default";
  18                 pinctrl-0 = <&jtag_disable_pins>;
  19
  20                 button0 {
  21                         label = "reset";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  24                 };
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29
  30                 power {
  31                         label = "gl-x750:green:power";
  32                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  33                         default-state = "on";
  34                 };
  35
  36                 wlan2g {
  37                         label = "gl-x750:green:wlan2g";
  38                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy1tpt";
  40                 };
  41
  42                 wlan5g {
  43                         label = "gl-x750:green:wlan5g";
  44                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47
  48                 wan {
  49                         label = "gl-x750:green:wan";
  50                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 4g {
  54                         label = "gl-x750:green:4g";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  56                 };
  57         };
  58 };
  59
  60 &pcie0 {
  61         status = "okay";
  62 };
  63
  64 &uart {
  65         status = "okay";
  66 };
  67
  68 &usb0 {
  69         #address-cells = <1>;
  70         #size-cells = <0>;
  71         status = "okay";
  72
  73         hub_port: port@1 {
  74                 reg = <1>;
  75                 #trigger-source-cells = <0>;
  76         };
  77 };
  78
  79 &usb_phy {
  80         status = "okay";
  81 };
  82
  83 &spi {
  84         status = "okay";
  85         num-cs = <0>;
  86
  87         flash@0 {
  88                 compatible = "jedec,spi-nor";
  89                 reg = <0>;
  90                 spi-max-frequency = <25000000>;
  91
  92                 partitions {
  93                         compatible = "fixed-partitions";
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96
  97                         partition@0 {
  98                                 label = "u-boot";
  99                                 reg = <0x000000 0x040000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@40000 {
 104                                 label = "u-boot-env";
 105                                 reg = <0x040000 0x010000>;
 106                         };
 107
 108                         art: partition@50000 {
 109                                 label = "art";
 110                                 reg = <0x050000 0x010000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@60000 {
 115                                 compatible = "denx,uimage";
 116                                 label = "firmware";
 117                                 reg = <0x060000 0xfa0000>;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &eth0 {
 124         status = "okay";
 125         mtd-mac-address = <&art 0x0>;
 126         phy-handle = <&swphy4>;
 127 };
 128
 129 &eth1 {
 130         mtd-mac-address = <&art 0x0>;
 131         mtd-mac-address-increment = <1>;
 132 };
 133
 134 &wmac {
 135         status = "okay";
 136         mtd-cal-data = <&art 0x1000>;
 137         mtd-mac-address = <&art 0x1002>;
 138 };