target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-d50-v1", "qca,qca9531";
  11         model = "TP-Link Archer D50 v1";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 wlan2g {
  25                         label = "tp-link:white:wlan2g";
  26                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "phy0tpt";
  28                 };
  29
  30                 wlan5g {
  31                         label = "tp-link:white:wlan5g";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy1tpt";
  34                 };
  35
  36                 qss {
  37                         label = "tp-link:white:qss";
  38                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wan {
  42                         label = "tp-link:white:wan";
  43                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 lan {
  47                         label = "tp-link:white:lan";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 usb {
  52                         label = "tp-link:white:usb";
  53                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  54                         trigger-sources = <&hub_port0>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57
  58                 internet {
  59                         label = "tp-link:white:internet";
  60                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 led_system: system {
  64                         label = "tp-link:white:system";
  65                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  66                         default-state = "on";
  67                 };
  68         };
  69
  70         keys {
  71                 compatible = "gpio-keys";
  72
  73                 reset {
  74                         label = "Reset button";
  75                         linux,code = <KEY_RESTART>;
  76                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 rfkill {
  80                         label = "RFKILL button";
  81                         linux,code = <KEY_RFKILL>;
  82                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  83                 };
  84
  85                 wps {
  86                         label = "WPS button";
  87                         linux,code = <KEY_WPS_BUTTON>;
  88                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91 };
  92
  93 &uart {
  94         status = "okay";
  95 };
  96
  97 &spi {
  98         status = "okay";
  99
 100         flash@0 {
 101                 compatible = "jedec,spi-nor";
 102                 reg = <0>;
 103                 spi-max-frequency = <10000000>;
 104
 105                 partitions {
 106                         compatible = "fixed-partitions";
 107                         #address-cells = <1>;
 108                         #size-cells = <1>;
 109
 110                         partition@0 {
 111                                 label = "u-boot";
 112                                 reg = <0x000000 0x020000>;
 113                                 read-only;
 114                         };
 115
 116                         partition@20000 {
 117                                 compatible = "tplink,firmware";
 118                                 label = "firmware";
 119                                 reg = <0x020000 0x7a0000>;
 120                         };
 121
 122                         partition@7c0000 {
 123                                 label = "config";
 124                                 reg = <0x7c0000 0x010000>;
 125                                 read-only;
 126                         };
 127
 128                         romfile: partition@7d0000 {
 129                                 label = "romfile";
 130                                 reg = <0x7d0000 0x010000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@7e0000 {
 135                                 label = "rom";
 136                                 reg = <0x7e0000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         art: partition@7f0000 {
 141                                 label = "art";
 142                                 reg = <0x7f0000 0x010000>;
 143                                 read-only;
 144                         };
 145                 };
 146         };
 147 };
 148
 149 &eth0 {
 150         status = "okay";
 151
 152         phy-handle = <&swphy4>;
 153
 154         mtd-mac-address = <&romfile 0xf100>;
 155         mtd-mac-address-increment = <1>;
 156 };
 157
 158 &eth1 {
 159         mtd-mac-address = <&romfile 0xf100>;
 160 };
 161
 162 &wmac {
 163         status = "okay";
 164
 165         mtd-cal-data = <&art 0x1000>;
 166         mtd-mac-address = <&romfile 0xf100>;
 167 };
 168
 169 &pcie0 {
 170         status = "okay";
 171
 172         wifi@0,0 {
 173                 compatible = "pci168c,003c";
 174                 reg = <0x0000 0 0 0 0>;
 175         };
 176 };
 177
 178 &usb_phy {
 179         status = "okay";
 180 };
 181
 182 &usb0 {
 183         #address-cells = <1>;
 184         #size-cells = <0>;
 185         status = "okay";
 186
 187         hub_port0: port@1 {
 188                 reg = <1>;
 189                 #trigger-source-cells = <0>;
 190         };
 191 };