target/linux/ath79/dts/qca9531_tplink_tl-mr6400-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-mr6400-v1", "qca,qca9531";
  11         model = "TP-Link TL-MR6400 v1";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18                 label-mac-device = &wmac;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 /* D12 */
  25                 wan {
  26                         label = "tp-link:white:wan";
  27                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  28                 };
  29
  30                 /* D11 */
  31                 4g {
  32                         label = "tp-link:white:4g";
  33                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 /* D5 */
  37                 wps {
  38                         label = "tp-link:white:wps";
  39                         gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
  40                 };
  41
  42                 /* D3 */
  43                 wlan {
  44                         label = "tp-link:white:wlan";
  45                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48
  49                 /* D2 */
  50                 led_power: power {
  51                         label = "tp-link:white:power";
  52                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 /* D4 */
  56                 lan {
  57                         label = "tp-link:white:lan";
  58                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  59                 };
  60         };
  61
  62         keys {
  63                 compatible = "gpio-keys";
  64
  65                 /* SW2 */
  66                 reset {
  67                         label = "Reset button";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72
  73                 /* SW3 */
  74                 rfkill {
  75                         label = "RF kill button";
  76                         linux,code = <KEY_RFKILL>;
  77                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  78                         debounce-interval = <60>;
  79                 };
  80         };
  81
  82         gpio-export {
  83                 compatible = "gpio-export";
  84
  85                 gpio_usb_power {
  86                         gpio-export,name = "tp-link:power:lte";
  87                         gpio-export,output = <0>;
  88                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91 };
  92
  93 &uart {
  94         status = "okay";
  95 };
  96
  97 &spi {
  98         status = "okay";
  99
 100         num-cs = <1>;
 101
 102         flash@0 {
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <25000000>;
 106
 107                 partitions {
 108                         compatible = "fixed-partitions";
 109                         #address-cells = <1>;
 110                         #size-cells = <1>;
 111
 112                         uboot: partition@0 {
 113                                 label = "u-boot";
 114                                 reg = <0x000000 0x020000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@20000 {
 119                                 compatible = "tplink,firmware";
 120                                 label = "firmware";
 121                                 reg = <0x020000 0x7d0000>;
 122                         };
 123
 124                         art: partition@7f0000 {
 125                                 label = "art";
 126                                 reg = <0x7f0000 0x010000>;
 127                                 read-only;
 128                         };
 129                 };
 130         };
 131 };
 132
 133 &eth0 {
 134         status = "okay";
 135
 136         phy-handle = <&swphy0>;
 137
 138         mtd-mac-address = <&uboot 0x1fc00>;
 139         mtd-mac-address-increment = <1>;
 140 };
 141
 142 &eth1 {
 143         mtd-mac-address = <&uboot 0x1fc00>;
 144         mtd-mac-address-increment = <(-1)>;
 145 };
 146
 147 &wmac {
 148         status = "okay";
 149
 150         mtd-cal-data = <&art 0x1000>;
 151         mtd-mac-address = <&uboot 0x1fc00>;
 152 };
 153
 154 &usb0 {
 155         #address-cells = <1>;
 156         #size-cells = <0>;
 157         status = "okay";
 158
 159         hub_port: port@1 {
 160                 reg = <1>;
 161                 #trigger-source-cells = <0>;
 162         };
 163 };
 164
 165 &usb_phy {
 166         status = "okay";
 167 };