target/linux/ath79/dts/qca9533_glinet_ar300m_nor.dts

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9533_glinet_ar300m.dtsi"
   7
   8 &spi {
   9         status = "okay";
  10         num-cs = <0>;
  11
  12         flash@0 {
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15                 compatible = "winbond,w25q128", "jedec,spi-nor";
  16                 reg = <0>;
  17                 spi-max-frequency = <25000000>;
  18
  19                 partitions {
  20                         compatible = "fixed-partitions";
  21                         #address-cells = <1>;
  22                         #size-cells = <1>;
  23
  24                         partition@0 {
  25                                 label = "u-boot";
  26                                 reg = <0x000000 0x040000>;
  27                                 read-only;
  28                         };
  29
  30                         partition@1 {
  31                                 label = "u-boot-env";
  32                                 reg = <0x040000 0x010000>;
  33                         };
  34
  35                         partition@2 {
  36                                 label = "firmware";
  37                                 reg = <0x050000 0xfa0000>;
  38                         };
  39
  40                         art: partition@3 {
  41                                 label = "art";
  42                                 reg = <0xff0000 0x010000>;
  43                         };
  44                 };
  45         };
  46 };