target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca953x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 label-mac-device = &wmac;
  11         };
  12
  13         leds: leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi {
  17                         label = "green:wlan";
  18                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  19                         linux,default-trigger = "phy0tpt";
  20                 };
  21
  22                 led_qss: qss {
  23                         label = "green:qss";
  24                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wan {
  28                         label = "green:wan";
  29                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 lan1 {
  33                         label = "green:lan1";
  34                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 lan2 {
  38                         label = "green:lan2";
  39                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 lan3 {
  43                         label = "green:lan3";
  44                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan4 {
  48                         label = "green:lan4";
  49                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  50                 };
  51         };
  52
  53         keys {
  54                 compatible = "gpio-keys";
  55
  56                 reset {
  57                         label = "Reset button";
  58                         linux,code = <KEY_RESTART>;
  59                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  60                         debounce-interval = <60>;
  61                 };
  62
  63                 rfkill {
  64                         label = "RFKILL button";
  65                         linux,code = <KEY_RFKILL>;
  66                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  67                         debounce-interval = <60>;
  68                 };
  69         };
  70 };
  71
  72 &spi {
  73         status = "okay";
  74
  75         flash@0 {
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <25000000>;
  79
  80                 partitions {
  81                         compatible = "fixed-partitions";
  82                         #address-cells = <1>;
  83                         #size-cells = <1>;
  84
  85                         uboot: partition@0 {
  86                                 label = "u-boot";
  87                                 reg = <0x000000 0x020000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@20000 {
  92                                 compatible = "tplink,firmware";
  93                                 label = "firmware";
  94                                 reg = <0x020000 0x3d0000>;
  95                         };
  96
  97                         art: partition@3f0000 {
  98                                 label = "art";
  99                                 reg = <0x3f0000 0x010000>;
 100                                 read-only;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &eth0 {
 107         status = "okay";
 108
 109         phy-handle = <&swphy4>;
 110
 111         mtd-mac-address = <&uboot 0x1fc00>;
 112         mtd-mac-address-increment = <1>;
 113 };
 114
 115 &eth1 {
 116         mtd-mac-address = <&uboot 0x1fc00>;
 117 };
 118
 119 &wmac {
 120         status = "okay";
 121
 122         mtd-cal-data = <&art 0x1000>;
 123         mtd-mac-address = <&uboot 0x1fc00>;
 124 };