target/linux/ath79/dts/qca9533_tplink_tl-wr841.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9533.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "tp-link:green:wlan";
  23                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  24                         default-state = "off";
  25                         linux,default-trigger = "phy0tpt";
  26                 };
  27
  28                 system: wifi_qss {
  29                         label = "tp-link:green:qss";
  30                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  31                         default-state = "off";
  32                 };
  33
  34                 wan {
  35                         label = "tp-link:green:wan";
  36                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  37                         default-state = "off";
  38                 };
  39
  40                 lan1 {
  41                         label = "tp-link:green:lan1";
  42                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                 };
  45
  46                 lan2 {
  47                         label = "tp-link:green:lan2";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                         default-state = "off";
  50                 };
  51
  52                 lan3 {
  53                         label = "tp-link:green:lan3";
  54                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                 };
  57
  58                 lan4 {
  59                         label = "tp-link:green:lan4";
  60                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                 };
  63         };
  64
  65         keys {
  66                 compatible = "gpio-keys";
  67                 #address-cells = <1>;
  68                 #size-cells = <0>;
  69
  70                 reset {
  71                         label = "Reset button";
  72                         linux,code = <KEY_RESTART>;
  73                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  74                         debounce-interval = <60>;
  75                 };
  76
  77                 rfkill {
  78                         label = "RFKILL button";
  79                         linux,code = <KEY_RFKILL>;
  80                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  81                         debounce-interval = <60>;
  82                 };
  83         };
  84 };
  85
  86 &uart {
  87         status = "okay";
  88 };
  89
  90 &spi {
  91         status = "okay";
  92         num-cs = <1>;
  93
  94         flash@0 {
  95                 #address-cells = <1>;
  96                 #size-cells = <1>;
  97                 compatible = "jedec,spi-nor";
  98                 reg = <0>;
  99                 spi-max-frequency = <25000000>;
 100
 101                 partitions {
 102                         compatible = "fixed-partitions";
 103                         #address-cells = <1>;
 104                         #size-cells = <1>;
 105
 106                         uboot:  partition@0 {
 107                                 label = "u-boot";
 108                                 reg = <0x000000 0x020000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@20000 {
 113                                 label = "firmware";
 114                                 reg = <0x020000 0x3d0000>;
 115                         };
 116
 117                         art: partition@3f0000 {
 118                                 label = "art";
 119                                 reg = <0x3f0000 0x010000>;
 120                                 read-only;
 121                         };
 122                 };
 123         };
 124 };
 125
 126 &eth1 {
 127         mtd-mac-address = <&uboot 0x1fc00>;
 128 };
 129
 130 &eth0 {
 131         status = "okay";
 132         phy-handle = <&swphy4>;
 133
 134         mtd-mac-address = <&uboot 0x1fc00>;
 135         mtd-mac-address-increment = <1>;
 136 };
 137
 138 &wmac {
 139         status = "okay";
 140         mtd-cal-data = <&art 0x1000>;
 141         mtd-mac-address = <&uboot 0x1fc00>;
 142 };