ath79: fix wrong pll-data value for I-O DATA WN-AC-DGR devices
[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9557_iodata_wn-ac-dgr.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "qca9557.dtsi"
8
9 / {
10 aliases {
11 led-boot = &power;
12 led-failsafe = &power;
13 led-running = &power;
14 led-upgrade = &power;
15 };
16
17 chosen {
18 bootargs = "console=ttyS0,115200n8";
19 };
20
21 leds {
22 compatible = "gpio-leds";
23
24 power: power {
25 label = "iodata:green:power";
26 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
27 default-state = "on";
28 };
29
30 copy {
31 label = "iodata:green:copy";
32 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
33 default-state = "off";
34 };
35
36 eco {
37 label = "iodata:green:eco";
38 gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
39 default-state = "off";
40 };
41
42 wlan5g {
43 label = "iodata:green:wlan5g";
44 gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
45 default-state = "off";
46 linux,default-trigger = "phy0tpt";
47 };
48
49 wlan2g {
50 label = "iodata:green:wlan2g";
51 gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
52 default-state = "off";
53 linux,default-trigger = "phy1tpt";
54 };
55
56 notification {
57 label = "iodata:amber:notification";
58 gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
59 default-state = "off";
60 };
61 };
62
63 keys {
64 compatible = "gpio-keys-polled";
65 poll-interval = <20>;
66
67 button_eco {
68 label = "eco";
69 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
70 linux,code = <BTN_1>;
71 debounce-interval = <60>;
72 };
73
74 auto {
75 label = "auto";
76 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
77 linux,code = <BTN_0>;
78 linux,input-type = <EV_SW>;
79 debounce-interval = <60>;
80 };
81
82 button_copy {
83 label = "copy";
84 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
85 linux,code = <BTN_1>;
86 debounce-interval = <60>;
87 };
88
89 wps {
90 label = "wps";
91 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
92 linux,code = <KEY_WPS_BUTTON>;
93 debounce-interval = <60>;
94 };
95
96 reset {
97 label = "reset";
98 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
99 linux,code = <KEY_RESTART>;
100 debounce-interval = <60>;
101 };
102
103 router {
104 label = "router";
105 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
106 linux,code = <BTN_0>;
107 linux,input-type = <EV_SW>;
108 debounce-interval = <60>;
109 };
110 };
111 };
112
113 &spi {
114 status = "okay";
115 num-cs = <1>;
116
117 flash@0 {
118 compatible = "jedec,spi-nor";
119 reg = <0>;
120 spi-max-frequency = <25000000>;
121
122 partitions {
123 compatible = "fixed-partitions";
124 #address-cells = <1>;
125 #size-cells = <1>;
126
127 partition@0 {
128 label = "u-boot";
129 reg = <0x000000 0x030000>;
130 read-only;
131 };
132
133 partition@30000 {
134 label = "u-boot-env";
135 reg = <0x030000 0x010000>;
136 read-only;
137 };
138
139 partition@40000 {
140 label = "firmware";
141 reg = <0x040000 0xe50000>;
142 };
143
144 partition@e90000 {
145 label = "manufacture";
146 reg = <0xe90000 0x100000>;
147 read-only;
148 };
149
150 partition@f90000 {
151 label = "backup";
152 reg = <0xf90000 0x010000>;
153 read-only;
154 };
155
156 partition@fa0000 {
157 label = "storage";
158 reg = <0xfa0000 0x050000>;
159 read-only;
160 };
161
162 art: partition@ff0000 {
163 label = "art";
164 reg = <0xff0000 0x010000>;
165 read-only;
166 };
167 };
168 };
169 };
170
171 &mdio0 {
172 status = "okay";
173
174 phy0: ethernet-phy@0 {
175 reg = <0>;
176
177 qca,ar8327-initvals = <
178 0x04 0x87600000 /* PORT0 PAD MODE CTRL */
179 0x7c 0x0000007e /* PORT0_STATUS */
180 >;
181 };
182 };
183
184 &eth0 {
185 status = "okay";
186
187 pll-data = <0xa6000000 0x00000101 0x00001616>;
188 phy-handle = <&phy0>;
189 };
190
191 &pcie1 {
192 status = "okay";
193
194 wifi@0,0 {
195 compatible = "pci168c,003c";
196 reg = <0x0000 0 0 0 0>;
197 qca,no-eeprom;
198 };
199 };
200
201 &uart {
202 status = "okay";
203 };
204
205 &usb_phy0 {
206 status = "okay";
207 };
208
209 &usb0 {
210 status = "okay";
211 };
212
213 &wmac {
214 status = "okay";
215 qca,no-eeprom;
216 };