target/linux/ath79/dts/qca9558_engenius_epg5000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         model = "EnGenius EPG5000";
  11         compatible = "engenius,epg5000", "qca,qca9558";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "epg5000:amber:power";
  25                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wlan2g {
  30                         label = "epg5000:blue:wlan2g";
  31                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wlan5g {
  36                         label = "epg5000:blue:wlan5g";
  37                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wps_amber {
  42                         label = "epg5000:amber:wps";
  43                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wps_blue {
  47                         label = "epg5000:blue:wps";
  48                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys";
  54
  55                 reset {
  56                         label = "reset";
  57                         linux,code = <KEY_RESTART>;
  58                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  59                         debounce-interval = <60>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         linux,code = <KEY_WPS_BUTTON>;
  65                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  66                         debounce-interval = <60>;
  67                 };
  68         };
  69 };
  70
  71 &eth0 {
  72         status = "okay";
  73
  74         phy-handle = <&phy0>;
  75         pll-data = <0xa6000000 0x00000101 0x00001616>;
  76 };
  77
  78 &mdio0 {
  79         status = "okay";
  80
  81         phy0: ethernet-phy@0 {
  82                 reg = <0>;
  83
  84                 qca,ar8327-initvals = <
  85                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
  86                         0x7c 0x0000007e /* PORT0_STATUS */
  87                         >;
  88         };
  89 };
  90
  91 &pcie0 {
  92         status = "okay";
  93
  94         wifi@0,0 {
  95                 compatible = "pci168c,003c";
  96                 reg = <0x0000 0 0 0 0>;
  97         };
  98 };
  99
 100 &spi {
 101         status = "okay";
 102
 103         num-cs = <1>;
 104
 105         flash@0 {
 106                 compatible = "jedec,spi-nor";
 107                 reg = <0>;
 108                 spi-max-frequency = <25000000>;
 109
 110                 partitions {
 111                         compatible = "fixed-partitions";
 112                         #address-cells = <1>;
 113                         #size-cells = <1>;
 114
 115                         partition@0 {
 116                                 label = "u-boot";
 117                                 reg = <0x000000 0x030000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@30000 {
 122                                 label = "u-boot-env";
 123                                 reg = <0x030000 0x010000>;
 124                         };
 125
 126                         partition@40000 {
 127                                 compatible = "denx,uimage";
 128                                 label = "firmware";
 129                                 reg = <0x040000 0xe50000>;
 130                         };
 131
 132                         partition@790000 {
 133                                 label = "manufacture";
 134                                 reg = <0xe90000 0x100000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@ed0000 {
 139                                 label = "backup";
 140                                 reg = <0xf90000 0x010000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@fe0000 {
 145                                 label = "storage";
 146                                 reg = <0xfa0000 0x050000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@ff0000 {
 151                                 label = "art";
 152                                 reg = <0xff0000 0x010000>;
 153                                 read-only;
 154                         };
 155                 };
 156         };
 157 };
 158
 159 &uart {
 160         status = "okay";
 161 };
 162
 163 &usb_phy1 {
 164         status = "okay";
 165 };
 166
 167 &usb1 {
 168         status = "okay";
 169 };
 170
 171 &wmac {
 172         status = "okay";
 173
 174         qca,no-eeprom;
 175 };