target/linux/ath79/dts/qca9558_netgear_ex7300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power_green;
  11                 led-failsafe = &led_power_amber;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_amber;
  14                 label-mac-device = &eth0;
  15         };
  16
  17         led_spi {
  18                 compatible = "spi-gpio";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 sck-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  23                 mosi-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  24                 num-chipselects = <0>;
  25
  26                 led_gpio: led_gpio@0 {
  27                         compatible = "nxp,74lvc594";
  28                         reg = <0>;
  29                         gpio-controller;
  30                         #gpio-cells = <2>;
  31                         registers-number = <1>;
  32                         spi-max-frequency = <500000>;
  33
  34                         gpio_latch_bit {
  35                                 gpio-hog;
  36                                 gpios = <4 GPIO_ACTIVE_HIGH>;
  37                                 output-high;
  38                                 line-name = "gpio-latch-bit";
  39                         };
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 led_power_green: power_green {
  47                         label = "netgear:green:power";
  48                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 led_power_amber: power_amber {
  52                         label = "netgear:amber:power";
  53                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 left_blue {
  57                         label = "netgear:blue:left";
  58                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 right_blue {
  62                         label = "netgear:blue:right";
  63                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wps_green {
  67                         label = "netgear:green:wps";
  68                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 client_red {
  72                         label = "netgear:red:client";
  73                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 client_green {
  77                         label = "netgear:green:client";
  78                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 router_red {
  82                         label = "netgear:red:router";
  83                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 router_green {
  87                         label = "netgear:green:router";
  88                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91
  92         keys {
  93                 compatible = "gpio-keys";
  94
  95                 reset {
  96                         label = "Reset button";
  97                         linux,code = <KEY_RESTART>;
  98                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  99                         debounce-interval = <60>;
 100                 };
 101
 102                 wps {
 103                         label = "WPS button";
 104                         linux,code = <KEY_WPS_BUTTON>;
 105                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 106                         debounce-interval = <60>;
 107                 };
 108
 109                 extender_apmode {
 110                         label = "EXTENDER/APMODE switch";
 111                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
 112                         linux,code = <BTN_0>;
 113                         linux,input-type = <EV_SW>;
 114                         debounce-interval = <60>;
 115                 };
 116         };
 117 };
 118
 119 &pcie0 {
 120         status = "okay";
 121 };
 122
 123 &uart {
 124         status = "okay";
 125 };
 126
 127 &pll {
 128         clocks = <&extosc>;
 129 };
 130
 131 &spi {
 132         status = "okay";
 133
 134         num-cs = <1>;
 135
 136         flash@0 {
 137                 compatible = "jedec,spi-nor";
 138                 reg = <0>;
 139                 spi-max-frequency = <25000000>;
 140
 141                 partitions {
 142                         compatible = "fixed-partitions";
 143                         #address-cells = <1>;
 144                         #size-cells = <1>;
 145
 146                         uboot: partition@0 {
 147                                 label = "u-boot";
 148                                 reg = <0x000000 0x040000>;
 149                                 read-only;
 150                         };
 151
 152                         partition@40000 {
 153                                 label = "u-boot-env";
 154                                 reg = <0x040000 0x010000>;
 155                         };
 156
 157                         caldata: partition@50000 {
 158                                 label = "caldata";
 159                                 reg = <0x050000 0x010000>;
 160                                 read-only;
 161                         };
 162
 163                         partition@60000 {
 164                                 label = "caldata-backup";
 165                                 reg = <0x060000 0x010000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@70000 {
 170                                 label = "config";
 171                                 reg = <0x070000 0x010000>;
 172                         };
 173
 174                         partition@80000 {
 175                                 label = "pot";
 176                                 reg = <0x080000 0x010000>;
 177                         };
 178
 179                         partition@90000 {
 180                                 label = "firmware";
 181                                 reg = <0x090000 0xf30000>;
 182                                 compatible = "denx,uimage";
 183                         };
 184
 185                         partition@fc0000 {
 186                                 label = "language";
 187                                 reg = <0xfc0000 0x040000>;
 188                         };
 189                 };
 190         };
 191 };
 192
 193 &wmac {
 194         status = "okay";
 195
 196         mtd-cal-data = <&caldata 0x1000>;
 197         mtd-mac-address = <&caldata 0x06>;
 198 };
 199
 200 &mdio0 {
 201         status = "okay";
 202
 203         phy4: ethernet-phy@4 {
 204                 reg = <4>;
 205                 phy-mode = "rgmii";
 206         };
 207 };
 208
 209 &eth0 {
 210         status = "okay";
 211
 212         mtd-mac-address = <&caldata 0x00>;
 213
 214         phy-handle = <&phy4>;
 215         phy-mode = "rgmii-rxid";
 216
 217         pll-data = <0x86000000 0x80000101 0x80001313>;
 218 };