target/linux/ath79/dts/qca9558_tl-wr1043nd.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  24                         linux,default-trigger = "heartbeat";
  25                 };
  26
  27                 usb {
  28                         label = "tp-link:green:usb";
  29                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         trigger-sources = <&hub_port0>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 wifi_green {
  36                         label = "tp-link:green:wlan";
  37                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  38                         default-state = "off";
  39                         linux,default-trigger = "phy0tpt";
  40                 };
  41
  42                 wifi_wps {
  43                         label = "tp-link:green:wps";
  44                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  45                         default-state = "off";
  46                 };
  47         };
  48
  49         keys {
  50                 compatible = "gpio-keys";
  51                 #address-cells = <1>;
  52                 #size-cells = <0>;
  53
  54                 reset {
  55                         label = "Reset button";
  56                         linux,code = <KEY_RESTART>;
  57                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  58                         debounce-interval = <60>;
  59                 };
  60
  61                 wifi {
  62                         label = "RFKILL button";
  63                         linux,code = <KEY_RFKILL>;
  64                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  65                         debounce-interval = <60>;
  66                 };
  67         };
  68
  69         gpio-export {
  70                 compatible = "gpio-export";
  71                 #size-cells = <0>;
  72
  73                 gpio_usb_power {
  74                         gpio-export,name = "tp-link:power:usb";
  75                         gpio-export,output = <1>;
  76                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  77                 };
  78         };
  79 };
  80
  81 &uart {
  82         status = "okay";
  83 };
  84
  85 &gpio {
  86         status = "okay";
  87 };
  88
  89 &usb_phy0 {
  90         status = "okay";
  91 };
  92
  93 &usb0 {
  94         status = "okay";
  95
  96         hub_port0: port@1 {
  97                 reg = <1>;
  98                 #trigger-source-cells = <0>;
  99         };
 100 };
 101
 102 &spi {
 103         status = "okay";
 104         num-cs = <1>;
 105
 106         flash@0 {
 107                 #address-cells = <1>;
 108                 #size-cells = <1>;
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         uboot:  partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x000000 0x020000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@20000 {
 125                                 label = "firmware";
 126                                 reg = <0x020000 0x7d0000>;
 127                         };
 128
 129                         art: partition@7f0000 {
 130                                 label = "art";
 131                                 reg = <0x7f0000 0x010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &mdio0 {
 139         status = "okay";
 140
 141         phy0: ethernet-phy@0 {
 142                 reg = <0>;
 143                 qca,ar8327-initvals = <
 144                     0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 145                     0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 146                     0x10 0x81000080 /* POWER_ON_STRIP */
 147                     0x50 0xcc35cc35 /* LED_CTRL0 */
 148                     0x54 0xca35ca35 /* LED_CTRL1 */
 149                     0x58 0xc935c935 /* LED_CTRL2 */
 150                     0x5c 0x03ffff00 /* LED_CTRL3 */
 151                     0x7c 0x0000007e /* PORT0_STATUS */
 152                     0x94 0x0000007e /* PORT6 STATUS */
 153                 >;
 154         };
 155 };
 156
 157 &mdio1 {
 158         status = "okay";
 159
 160         phy1: ethernet-phy@1 {
 161                 reg = <1>;
 162         };
 163 };
 164
 165 &eth0 {
 166         status = "okay";
 167
 168         mtd-mac-address = <&uboot 0x1fc00>;
 169         mtd-mac-address-increment = <1>;
 170         phy-handle = <&phy0>;
 171 };
 172
 173 &eth1 {
 174         status = "okay";
 175
 176         mtd-mac-address = <&uboot 0x1fc00>;
 177         phy-handle = <&phy1>;
 178
 179         fixed-link {
 180                 speed = <1000>;
 181                 full-duplex;
 182         };
 183 };
 184
 185 &wmac {
 186         status = "okay";
 187         mtd-cal-data = <&art 0x1000>;
 188         mtd-mac-address = <&uboot 0x1fc00>;
 189 };