target/linux/ath79/dts/qca9558_tplink_archer-c7.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         gpio_leds: leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  24                         default-state = "on";
  25                 };
  26
  27                 usb1 {
  28                         label = "tp-link:green:usb1";
  29                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         trigger-sources = <&hub_port1>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 usb2 {
  36                         label = "tp-link:green:usb2";
  37                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  38                         default-state = "off";
  39                         trigger-sources = <&hub_port0>;
  40                         linux,default-trigger = "usbport";
  41                 };
  42
  43                 led_wlan2g: wlan2g {
  44                         label = "tp-link:green:wlan2g";
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         default-state = "off";
  47                         linux,default-trigger = "phy1tpt";
  48                 };
  49
  50                 qss {
  51                         label = "tp-link:green:qss";
  52                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                 };
  55         };
  56
  57         gpio_keys: keys {
  58                 compatible = "gpio-keys";
  59                 #address-cells = <1>;
  60                 #size-cells = <0>;
  61
  62                 reset {
  63                         label = "Reset button";
  64                         linux,code = <KEY_RESTART>;
  65                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  66                         debounce-interval = <60>;
  67                 };
  68         };
  69
  70         gpio-export {
  71                 compatible = "gpio-export";
  72                 #size-cells = <0>;
  73
  74                 gpio_usb1_power {
  75                         gpio-export,name = "tp-link:power:usb1";
  76                         gpio-export,output = <1>;
  77                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  78                 };
  79
  80                 gpio_usb2_power {
  81                         gpio-export,name = "tp-link:power:usb2";
  82                         gpio-export,output = <1>;
  83                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  84                 };
  85
  86         };
  87 };
  88
  89 &pcie1 {
  90         status = "okay";
  91 };
  92
  93 &uart {
  94         status = "okay";
  95 };
  96
  97 &gpio {
  98         status = "okay";
  99 };
 100
 101 &usb_phy0 {
 102         status = "okay";
 103 };
 104
 105 &usb0 {
 106         status = "okay";
 107
 108         hub_port0: port@1 {
 109                 reg = <1>;
 110                 #trigger-source-cells = <0>;
 111         };
 112 };
 113
 114 &usb_phy1 {
 115         status = "okay";
 116 };
 117
 118 &usb1 {
 119         status = "okay";
 120
 121         hub_port1: port@1 {
 122                 reg = <1>;
 123                 #trigger-source-cells = <0>;
 124         };
 125 };
 126
 127 &spi {
 128         status = "okay";
 129         num-cs = <1>;
 130
 131         flash@0 {
 132                 #address-cells = <1>;
 133                 #size-cells = <1>;
 134                 compatible = "jedec,spi-nor";
 135                 reg = <0>;
 136                 spi-max-frequency = <25000000>;
 137
 138                 mtdparts: partitions {
 139                         compatible = "fixed-partitions";
 140                         #address-cells = <1>;
 141                         #size-cells = <1>;
 142                 };
 143         };
 144 };
 145
 146 &mdio0 {
 147         status = "okay";
 148
 149         phy0: ethernet-phy@0 {
 150                 reg = <0>;
 151
 152                 qca,ar8327-initvals = <
 153                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 154                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 155                         0x50 0xc737c737 /* LED_CTRL0 */
 156                         0x54 0x00000000 /* LED_CTRL1 */
 157                         0x58 0x00000000 /* LED_CTRL2 */
 158                         0x5c 0x0030c300 /* LED_CTRL3 */
 159                         0x7c 0x0000007e /* PORT0_STATUS */
 160                         0x94 0x0000007e /* PORT6 STATUS */
 161                         >;
 162         };
 163 };
 164
 165 &eth0 {
 166         status = "okay";
 167
 168         mtd-mac-address = <&uboot 0x1fc00>;
 169         mtd-mac-address-increment = <1>;
 170         phy-handle = <&phy0>;
 171
 172         gmac-config {
 173                 device = <&gmac>;
 174                 rgmii-enabled = <1>;
 175         };
 176 };
 177
 178 &eth1 {
 179         status = "okay";
 180
 181         mtd-mac-address = <&uboot 0x1fc00>;
 182
 183         fixed-link {
 184                 speed = <1000>;
 185                 full-duplex;
 186         };
 187 };
 188
 189 &wmac {
 190         status = "okay";
 191         mtd-cal-data = <&art 0x1000>;
 192         mtd-mac-address = <&uboot 0x1fc00>;
 193 };