target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca955x.dtsi"
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14                 mdio-gpio0 = &mdio2;
  15                 label-mac-device = &eth0;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 led_power: power {
  22                         label = "tp-link:blue:power";
  23                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 wlan2g {
  27                         label = "tp-link:blue:wlan2g";
  28                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "phy1tpt";
  30                 };
  31
  32                 wlan5g {
  33                         label = "tp-link:blue:wlan5g";
  34                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  35                         linux,default-trigger = "phy0tpt";
  36                 };
  37
  38                 lan_link {
  39                         label = "tp-link:green:lan_link";
  40                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 lan_data {
  44                         label = "tp-link:green:lan_data";
  45                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wps_blue {
  49                         label = "tp-link:blue:wps";
  50                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  51                 };
  52
  53                 wps_red {
  54                         label = "tp-link:red:wps";
  55                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  56                 };
  57         };
  58
  59         keys {
  60                 compatible = "gpio-keys";
  61
  62                 reset {
  63                         label = "Reset button";
  64                         linux,code = <KEY_RESTART>;
  65                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  66                         debounce-interval = <60>;
  67                 };
  68
  69                 leds {
  70                         label = "LED control button";
  71                         linux,code = <BTN_0>;
  72                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  73                         debounce-interval = <60>;
  74                 };
  75
  76                 wps {
  77                         label = "WPS button";
  78                         linux,code = <KEY_WPS_BUTTON>;
  79                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  80                         debounce-interval = <60>;
  81                 };
  82         };
  83
  84         mdio2: mdio {
  85                 compatible = "virtual,mdio-gpio";
  86
  87                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
  88                         <&gpio 1 GPIO_ACTIVE_HIGH>; /* MDIO */
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91
  92                 phy4: ethernet-phy@4 {
  93                         reg = <4>;
  94                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  95                 };
  96         };
  97 };
  98
  99 &pcie0 {
 100         status = "okay";
 101 };
 102
 103 &uart {
 104         status = "okay";
 105 };
 106
 107 &spi {
 108         status = "okay";
 109         num-cs = <1>;
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x020000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@20000 {
 128                                 compatible = "tplink,firmware";
 129                                 label = "firmware";
 130                                 reg = <0x020000 0x5e0000>;
 131                         };
 132
 133                         partition@600000 {
 134                                 label = "partition-table";
 135                                 reg = <0x600000 0x010000>;
 136                                 read-only;
 137                         };
 138
 139                         info: partition@610000 {
 140                                 label = "info";
 141                                 reg = <0x610000 0x020000>;
 142                                 read-only;
 143                         };
 144
 145                         partition@630000 {
 146                                 label = "config";
 147                                 reg = <0x630000 0x1c0000>;
 148                                 read-only;
 149                         };
 150
 151                         art: partition@7f0000 {
 152                                 label = "art";
 153                                 reg = <0x7f0000 0x010000>;
 154                                 read-only;
 155                         };
 156                 };
 157         };
 158 };
 159
 160 &eth0 {
 161         status = "okay";
 162
 163         phy-handle = <&phy4>;
 164         pll-data = <0xa6000000 0x00000101 0x00001616>;
 165
 166         mtd-mac-address = <&info 0x8>;
 167 };
 168
 169 &wmac {
 170         status = "okay";
 171
 172         mtd-cal-data = <&art 0x1000>;
 173         mtd-mac-address = <&info 0x8>;
 174         mtd-mac-address-increment = <(-1)>;
 175 };