target/linux/ath79/dts/qca9558_tplink_tl-wdr4900-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wdr4900-v2", "qca,qca9558";
  11         model = "TP-Link TL-WDR4900 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         gpio_leds: leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_system: system {
  28                         label = "tp-link:blue:system";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 usb1 {
  34                         label = "tp-link:green:usb1";
  35                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&hub_port1>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 usb2 {
  41                         label = "tp-link:green:usb2";
  42                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  43                         trigger-sources = <&hub_port0>;
  44                         linux,default-trigger = "usbport";
  45                 };
  46
  47                 wlan2g {
  48                         label = "tp-link:blue:wlan2g";
  49                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy0tpt";
  51                 };
  52
  53                 qss {
  54                         label = "tp-link:blue:qss";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  56                 };
  57         };
  58
  59          ath9k-leds {
  60                 compatible = "gpio-leds";
  61
  62                 wlan5g {
  63                         label = "tp-link:blue:wlan5g";
  64                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  65                         linux,default-trigger = "phy1tpt";
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 reset {
  73                         label = "Reset button";
  74                         linux,code = <KEY_RESTART>;
  75                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  76                         debounce-interval = <60>;
  77                 };
  78         };
  79
  80         gpio-export {
  81                 compatible = "gpio-export";
  82
  83                 gpio_usb1_power {
  84                         gpio-export,name = "tp-link:power:usb1";
  85                         gpio-export,output = <1>;
  86                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  87                 };
  88
  89                 gpio_usb2_power {
  90                         gpio-export,name = "tp-link:power:usb2";
  91                         gpio-export,output = <1>;
  92                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  93                 };
  94         };
  95 };
  96
  97 &pcie1 {
  98         status = "okay";
  99
 100         ath9k: wifi@0,0 {
 101                 compatible = "pci168c,0033";
 102                 reg = <0x0000 0 0 0 0>;
 103                 mtd-mac-address = <&uboot 0x1fc00>;
 104                 mtd-mac-address-increment = <(-2)>;
 105                 qca,no-eeprom;
 106                 #gpio-cells = <2>;
 107                 gpio-controller;
 108         };
 109 };
 110
 111 &uart {
 112         status = "okay";
 113 };
 114
 115 &usb_phy0 {
 116         status = "okay";
 117 };
 118
 119 &usb0 {
 120         #address-cells = <1>;
 121         #size-cells = <0>;
 122         status = "okay";
 123
 124         hub_port0: port@1 {
 125                 reg = <1>;
 126                 #trigger-source-cells = <0>;
 127         };
 128 };
 129
 130 &usb_phy1 {
 131         status = "okay";
 132 };
 133
 134 &usb1 {
 135         #address-cells = <1>;
 136         #size-cells = <0>;
 137         status = "okay";
 138
 139         hub_port1: port@1 {
 140                 reg = <1>;
 141                 #trigger-source-cells = <0>;
 142         };
 143 };
 144
 145 &spi {
 146         status = "okay";
 147         num-cs = <1>;
 148
 149         flash@0 {
 150                 compatible = "jedec,spi-nor";
 151                 reg = <0>;
 152                 spi-max-frequency = <25000000>;
 153
 154                 partitions {
 155                         compatible = "fixed-partitions";
 156                         #address-cells = <1>;
 157                         #size-cells = <1>;
 158
 159                         uboot: partition@0 {
 160                                 label = "u-boot";
 161                                 reg = <0x000000 0x020000>;
 162                                 read-only;
 163                         };
 164
 165                         partition@20000 {
 166                                 compatible = "tplink,firmware";
 167                                 label = "firmware";
 168                                 reg = <0x020000 0x7d0000>;
 169                         };
 170
 171                         art: partition@7f0000 {
 172                                 label = "art";
 173                                 reg = <0x7f0000 0x010000>;
 174                                 read-only;
 175                         };
 176                 };
 177         };
 178 };
 179
 180 &mdio0 {
 181         status = "okay";
 182
 183         phy0: ethernet-phy@0 {
 184                 reg = <0>;
 185
 186                 qca,ar8327-initvals = <
 187                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 188                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 189                         0x50 0xc737c737 /* LED_CTRL0 */
 190                         0x54 0x00000000 /* LED_CTRL1 */
 191                         0x58 0x00000000 /* LED_CTRL2 */
 192                         0x5c 0x0030c300 /* LED_CTRL3 */
 193                         0x7c 0x0000007e /* PORT0_STATUS */
 194                         0x94 0x0000007e /* PORT6 STATUS */
 195                 >;
 196         };
 197 };
 198
 199 &eth0 {
 200         status = "okay";
 201
 202         mtd-mac-address = <&uboot 0x1fc00>;
 203         mtd-mac-address-increment = <1>;
 204         phy-handle = <&phy0>;
 205         pll-data = <0x56000000 0x00000101 0x00001616>;
 206
 207         gmac-config {
 208                 device = <&gmac>;
 209                 rgmii-enabled = <1>;
 210         };
 211 };
 212
 213 &eth1 {
 214         status = "okay";
 215
 216         mtd-mac-address = <&uboot 0x1fc00>;
 217         pll-data = <0x03000101 0x00000101 0x00001616>;
 218
 219         fixed-link {
 220                 speed = <1000>;
 221                 full-duplex;
 222         };
 223 };
 224
 225 &wmac {
 226         status = "okay";
 227         mtd-cal-data = <&art 0x1000>;
 228         mtd-mac-address = <&uboot 0x1fc00>;
 229         mtd-mac-address-increment = <(-1)>;
 230 };