target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "heartbeat";
  28                 };
  29
  30                 usb {
  31                         label = "tp-link:green:usb";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                         trigger-sources = <&hub_port0>;
  34                         linux,default-trigger = "usbport";
  35                 };
  36
  37                 wifi_green {
  38                         label = "tp-link:green:wlan";
  39                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 wifi_wps {
  44                         label = "tp-link:green:wps";
  45                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  46                 };
  47         };
  48
  49         keys {
  50                 compatible = "gpio-keys";
  51
  52                 reset {
  53                         label = "Reset button";
  54                         linux,code = <KEY_RESTART>;
  55                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  56                         debounce-interval = <60>;
  57                 };
  58
  59                 wifi {
  60                         label = "RFKILL button";
  61                         linux,code = <KEY_RFKILL>;
  62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  63                         debounce-interval = <60>;
  64                 };
  65         };
  66
  67         gpio-export {
  68                 compatible = "gpio-export";
  69                 #size-cells = <0>;
  70
  71                 gpio_usb_power {
  72                         gpio-export,name = "tp-link:power:usb";
  73                         gpio-export,output = <1>;
  74                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  75                 };
  76         };
  77 };
  78
  79 &uart {
  80         status = "okay";
  81 };
  82
  83 &gpio {
  84         status = "okay";
  85 };
  86
  87 &usb_phy0 {
  88         status = "okay";
  89 };
  90
  91 &usb0 {
  92         #address-cells = <1>;
  93         #size-cells = <0>;
  94         status = "okay";
  95
  96         hub_port0: port@1 {
  97                 reg = <1>;
  98                 #trigger-source-cells = <0>;
  99         };
 100 };
 101
 102 &spi {
 103         status = "okay";
 104         num-cs = <1>;
 105
 106         flash@0 {
 107                 compatible = "jedec,spi-nor";
 108                 reg = <0>;
 109                 spi-max-frequency = <25000000>;
 110
 111                 partitions {
 112                         compatible = "fixed-partitions";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115
 116                         uboot:  partition@0 {
 117                                 label = "u-boot";
 118                                 reg = <0x000000 0x020000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@20000 {
 123                                 compatible = "tplink,firmware";
 124                                 label = "firmware";
 125                                 reg = <0x020000 0x7d0000>;
 126                         };
 127
 128                         art: partition@7f0000 {
 129                                 label = "art";
 130                                 reg = <0x7f0000 0x010000>;
 131                                 read-only;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &mdio0 {
 138         status = "okay";
 139
 140         phy0: ethernet-phy@0 {
 141                 reg = <0>;
 142                 qca,ar8327-initvals = <
 143                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 144                         0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 145                         0x10 0x81000080 /* POWER_ON_STRIP */
 146                         0x50 0xcc35cc35 /* LED_CTRL0 */
 147                         0x54 0xca35ca35 /* LED_CTRL1 */
 148                         0x58 0xc935c935 /* LED_CTRL2 */
 149                         0x5c 0x03ffff00 /* LED_CTRL3 */
 150                         0x7c 0x0000007e /* PORT0_STATUS */
 151                         0x94 0x0000007e /* PORT6 STATUS */
 152                 >;
 153         };
 154 };
 155
 156 &eth0 {
 157         status = "okay";
 158
 159         pll-data = <0x56000000 0x00000101 0x00001616>;
 160
 161         mtd-mac-address = <&uboot 0x1fc00>;
 162         mtd-mac-address-increment = <1>;
 163         phy-handle = <&phy0>;
 164 };
 165
 166 &eth1 {
 167         status = "okay";
 168
 169         pll-data = <0x03000101 0x00000101 0x00001616>;
 170
 171         mtd-mac-address = <&uboot 0x1fc00>;
 172
 173         fixed-link {
 174                 speed = <1000>;
 175                 full-duplex;
 176         };
 177 };
 178
 179 &wmac {
 180         status = "okay";
 181         mtd-cal-data = <&art 0x1000>;
 182         mtd-mac-address = <&uboot 0x1fc00>;
 183 };