target/linux/ath79/dts/qca9561_tplink_archer-c58-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9561_tplink_archer-c5x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c58-v1", "qca,qca9560";
  11         model = "TP-Link Archer C58 v1";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 power: power {
  24                         label = "tp-link:green:power";
  25                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wlan2g {
  30                         label = "tp-link:green:wlan2g";
  31                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wlan5g {
  36                         label = "tp-link:green:wlan5g";
  37                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wan_green {
  42                         label = "tp-link:green:wan";
  43                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan_amber {
  47                         label = "tp-link:amber:wan";
  48                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 lan {
  52                         label = "tp-link:green:lan";
  53                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 wps {
  57                         label = "tp-link:green:wps";
  58                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  59                 };
  60         };
  61 };
  62
  63 &spi {
  64         status = "okay";
  65         num-cs = <1>;
  66
  67         flash@0 {
  68                 compatible = "jedec,spi-nor";
  69                 reg = <0>;
  70                 spi-max-frequency = <25000000>;
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         partition@0 {
  78                                 label = "u-boot";
  79                                 reg = <0x000000 0x010000>;
  80                                 read-only;
  81                         };
  82
  83                         mac: partition@10000 {
  84                                 label = "mac";
  85                                 reg = <0x010000 0x010000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@20000 {
  90                                 compatible = "denx,uimage";
  91                                 label = "firmware";
  92                                 reg = <0x020000 0x7c0000>;
  93                         };
  94
  95                         partition@7e0000 {
  96                                 label = "tplink";
  97                                 reg = <0x7e0000 0x010000>;
  98                                 read-only;
  99                         };
 100
 101                         art: partition@7f0000 {
 102                                 label = "art";
 103                                 reg = <0x7f0000 0x010000>;
 104                                 read-only;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &eth0 {
 111         status = "okay";
 112         mtd-mac-address = <&mac 0x8>;
 113         mtd-mac-address-increment = <1>;
 114 };
 115
 116 &eth1 {
 117         status = "okay";
 118         mtd-mac-address = <&mac 0x8>;
 119 };
 120
 121 &wmac {
 122         status = "okay";
 123         mtd-cal-data = <&art 0x1000>;
 124         mtd-mac-address = <&mac 0x8>;
 125 };