target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9561_tplink_archer-c5x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c59-v1", "qca,qca9560";
  11         model = "TP-LINK Archer C59 v1";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 power: power {
  24                         label = "tp-link:green:power";
  25                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wlan2g {
  30                         label = "tp-link:green:wlan2g";
  31                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wlan5g {
  36                         label = "tp-link:green:wlan5g";
  37                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 wan_green {
  42                         label = "tp-link:green:wan";
  43                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan_amber {
  47                         label = "tp-link:amber:wan";
  48                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 lan {
  52                         label = "tp-link:green:lan";
  53                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 wps {
  57                         label = "tp-link:green:wps";
  58                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 usb {
  62                         label = "tp-link:green:usb";
  63                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  64                         linux,default-trigger = "usbport";
  65                         trigger-sources = <&hub_port>;
  66                 };
  67         };
  68 };
  69
  70 &usb0 {
  71         #address-cells = <1>;
  72         #size-cells = <0>;
  73         status = "okay";
  74
  75         hub_port: port@1 {
  76                 reg = <1>;
  77                 #trigger-source-cells = <0>;
  78         };
  79 };
  80
  81 &usb_phy0 {
  82         status = "okay";
  83 };
  84
  85 &spi {
  86         status = "okay";
  87         num-cs = <1>;
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 reg = <0>;
  92                 spi-max-frequency = <25000000>;
  93
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "u-boot";
 101                                 reg = <0x000000 0x010000>;
 102                                 read-only;
 103                         };
 104
 105                         mac: partition@10000 {
 106                                 label = "mac";
 107                                 reg = <0x010000 0x010000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@20000 {
 112                                 compatible = "denx,uimage";
 113                                 label = "firmware";
 114                                 reg = <0x020000 0xe30000>;
 115                         };
 116
 117                         partition@e50000 {
 118                                 label = "tplink";
 119                                 reg = <0xe50000 0x1a0000>;
 120                                 read-only;
 121                         };
 122
 123                         art: partition@ff0000 {
 124                                 label = "art";
 125                                 reg = <0xff0000 0x010000>;
 126                                 read-only;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134         mtd-mac-address = <&mac 0x8>;
 135         mtd-mac-address-increment = <1>;
 136 };
 137
 138 &eth1 {
 139         status = "okay";
 140         mtd-mac-address = <&mac 0x8>;
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145         mtd-cal-data = <&art 0x1000>;
 146         mtd-mac-address = <&mac 0x8>;
 147 };