target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "qca9561_tplink_archer-c5x.dtsi"
   5
   6 / {
   7         compatible = "tplink,archer-c59-v1", "qca,qca9560";
   8         model = "TP-Link Archer C59 v1";
   9 };
  10
  11 &leds {
  12         usb {
  13                 label = "tp-link:green:usb";
  14                 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  15                 linux,default-trigger = "usbport";
  16                 trigger-sources = <&hub_port>;
  17         };
  18 };
  19
  20 &usb0 {
  21         #address-cells = <1>;
  22         #size-cells = <0>;
  23         status = "okay";
  24
  25         hub_port: port@1 {
  26                 reg = <1>;
  27                 #trigger-source-cells = <0>;
  28         };
  29 };
  30
  31 &usb_phy0 {
  32         status = "okay";
  33 };
  34
  35 &spi {
  36         status = "okay";
  37         num-cs = <1>;
  38
  39         flash@0 {
  40                 compatible = "jedec,spi-nor";
  41                 reg = <0>;
  42                 spi-max-frequency = <25000000>;
  43
  44                 partitions {
  45                         compatible = "fixed-partitions";
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48
  49                         partition@0 {
  50                                 label = "u-boot";
  51                                 reg = <0x000000 0x010000>;
  52                                 read-only;
  53                         };
  54
  55                         mac: partition@10000 {
  56                                 label = "mac";
  57                                 reg = <0x010000 0x010000>;
  58                                 read-only;
  59                         };
  60
  61                         partition@20000 {
  62                                 compatible = "denx,uimage";
  63                                 label = "firmware";
  64                                 reg = <0x020000 0xe30000>;
  65                         };
  66
  67                         partition@e50000 {
  68                                 label = "tplink";
  69                                 reg = <0xe50000 0x1a0000>;
  70                                 read-only;
  71                         };
  72
  73                         art: partition@ff0000 {
  74                                 label = "art";
  75                                 reg = <0xff0000 0x010000>;
  76                                 read-only;
  77                         };
  78                 };
  79         };
  80 };