target/linux/ath79/dts/qca9561_tplink_archer-c5x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         compatible = "tplink,archer-c5x", "qca,qca9560";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200n8";
  13         };
  14
  15         led_spi {
  16                 compatible = "spi-gpio";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 gpio-sck = <&gpio 18 GPIO_ACTIVE_HIGH>;
  21                 gpio-mosi = <&gpio 17 GPIO_ACTIVE_HIGH>;
  22                 cs-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  23                 num-chipselects = <1>;
  24
  25                 led_gpio: led_gpio@0 {
  26                         compatible = "fairchild,74hc595";
  27                         reg = <0>;
  28                         gpio-controller;
  29                         #gpio-cells = <2>;
  30                         registers-number = <1>;
  31                         spi-max-frequency = <10000000>;
  32                 };
  33         };
  34
  35         keys {
  36                 compatible = "gpio-keys-polled";
  37                 poll-interval = <100>;
  38
  39                 wps_button {
  40                         label = "WPS button";
  41                         linux,code = <KEY_WPS_BUTTON>;
  42                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wifi_button {
  46                         label = "WiFi button";
  47                         linux,code = <KEY_RFKILL>;
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 reset_button {
  52                         label = "Reset button";
  53                         linux,code = <KEY_RESTART>;
  54                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         gpio-export {
  59                 compatible = "gpio-export";
  60
  61                 gpio_shift_register_oe {
  62                         gpio-export,name = "tp-link:oe:sr";
  63                         gpio-export,output = <0>;
  64                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  65                 };
  66
  67                 gpio_shift_register_reset {
  68                         gpio-export,name = "tp-link:reset:sr";
  69                         gpio-export,output = <1>;
  70                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  71                 };
  72
  73         };
  74 };
  75
  76 &uart {
  77         status = "okay";
  78 };
  79
  80 &gpio {
  81         status = "okay";
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86 };
  87
  88 &eth0 {
  89         phy-mode = "mii";
  90         phy-handle = <&swphy0>;
  91
  92         gmac-config {
  93                 device = <&gmac>;
  94
  95                 switch-phy-addr-swap = <1>;
  96                 switch-phy-swap = <1>;
  97         };
  98 };