target/linux/ath79/dts/qca9563_compex_wpj563.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "Compex WPJ563";
  10         compatible = "compex,wpj563", "qca,qca9563";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14                 led-boot = &led_sig4;
  15                 led-failsafe = &led_sig4;
  16                 led-running = &led_sig4;
  17                 led-upgrade = &led_sig4;
  18         };
  19
  20         beeper {
  21                 compatible = "gpio-beeper";
  22                 gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  23         };
  24
  25         keys {
  26                 compatible = "gpio-keys";
  27
  28                 reset {
  29                         label = "reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 sig1 {
  40                         label = "green:sig1";
  41                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 sig2 {
  45                         label = "green:sig2";
  46                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 sig3 {
  50                         label = "green:sig4";
  51                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 led_sig4: sig4 {
  55                         label = "green:sig4";
  56                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  57                 };
  58         };
  59 };
  60
  61 &pcie {
  62         status = "okay";
  63 };
  64
  65 &spi {
  66         status = "okay";
  67
  68         flash@0 {
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <25000000>;
  72
  73                 partitions {
  74                         compatible = "fixed-partitions";
  75                         #address-cells = <1>;
  76                         #size-cells = <1>;
  77
  78                         uboot: partition@0 {
  79                                 label = "u-boot";
  80                                 reg = <0x000000 0x030000>;
  81                                 read-only;
  82                         };
  83
  84                         partition@30000 {
  85                                 compatible = "denx,uimage";
  86                                 label = "firmware";
  87                                 reg = <0x030000 0xfc0000>;
  88                         };
  89
  90                         art: partition@ff0000 {
  91                                 label = "art";
  92                                 reg = <0xff0000 0x010000>;
  93                                 read-only;
  94                         };
  95                 };
  96         };
  97 };
  98
  99 &mdio0 {
 100         status = "okay";
 101
 102         phy-mask = <0>;
 103
 104         phy0: ethernet-phy@0 {
 105                 reg = <0>;
 106                 phy-mode = "sgmii";
 107                 qca,mib-poll-interval = <500>;
 108
 109                 qca,ar8327-initvals = <
 110                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 111                         0x7c 0x0000007e /* PORT0_STATUS */
 112                 >;
 113         };
 114 };
 115
 116 &eth0 {
 117         status = "okay";
 118
 119         pll-data = <0x03000101 0x00000101 0x00001919>;
 120
 121         mtd-mac-address = <&uboot 0x2e010>;
 122         phy-mode = "sgmii";
 123         phy-handle = <&phy0>;
 124 };
 125
 126 &usb_phy0 {
 127         status = "okay";
 128 };
 129
 130 &usb0 {
 131         status = "okay";
 132 };
 133
 134 &wmac {
 135         status = "okay";
 136
 137         mtd-cal-data = <&art 0x1000>;
 138 };