target/linux/ath79/dts/qca9563_tplink_archer-c7-v4.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,archer-c7-v4", "qca,qca9563";
  10         model = "TP-Link Archer C7 v4";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         led_spi {
  21                 compatible = "spi-gpio";
  22                 #address-cells = <1>;
  23                 #size-cells = <0>;
  24
  25                 sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;        // 74HC595 SRCLK (Serial Clock)
  26                 mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;       // 74HC595 SER (Serial)
  27                 cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;         // 74HC595 RCLK (Register Clock)
  28                 num-chipselects = <1>;
  29
  30                 led_gpio: led_gpio@0 {
  31                         compatible = "fairchild,74hc595";
  32                         reg = <0>;
  33                         gpio-controller;
  34                         #gpio-cells = <2>;
  35                         registers-number = <1>;
  36                         spi-max-frequency = <10000000>;
  37                 };
  38         };
  39
  40         gpio-export {
  41                 compatible = "gpio-export";
  42
  43                 gpio_shift_register_oe {
  44                         gpio-export,name = "tp-link:oe:sr";
  45                         gpio-export,output = <0>;
  46                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;      // 74HC595 /OE (Output Enable)
  47                 };
  48
  49                 gpio_shift_register_reset {
  50                         gpio-export,name = "tp-link:reset:sr";
  51                         gpio-export,output = <1>;
  52                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;     // 74HC595 /SRCLR (Serial Clear)
  53                 };
  54         };
  55
  56         leds {
  57                 compatible = "gpio-leds";
  58
  59                 led_system: system {
  60                         label = "green:system";
  61                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  62                         default-state = "on";
  63                 };
  64
  65                 usb1 {
  66                         label = "green:usb1";
  67                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  68                         trigger-sources = <&hub_port1>;
  69                         linux,default-trigger = "usbport";
  70                 };
  71
  72                 usb2 {
  73                         label = "green:usb2";
  74                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  75                         trigger-sources = <&hub_port0>;
  76                         linux,default-trigger = "usbport";
  77                 };
  78
  79                 wlan5g {
  80                         label = "green:wlan5g";
  81                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  82                         linux,default-trigger = "phy0tpt";
  83                 };
  84
  85                 wlan2g {
  86                         label = "green:wlan2g";
  87                         gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
  88                         linux,default-trigger = "phy1tpt";
  89                 };
  90
  91                 wan {
  92                         label = "green:wan";
  93                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 wan_fail {
  97                         label = "orange:wan";
  98                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
  99                 };
 100
 101                 lan1 {
 102                         label = "green:lan1";
 103                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 104                 };
 105
 106                 lan2 {
 107                         label = "green:lan2";
 108                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 109                 };
 110
 111                 lan3 {
 112                         label = "green:lan3";
 113                         gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>;
 114                 };
 115
 116                 lan4 {
 117                         label = "green:lan4";
 118                         gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>;
 119                 };
 120
 121                 wps {
 122                         label = "green:wps";
 123                         gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>;
 124                 };
 125         };
 126
 127         keys {
 128                 compatible = "gpio-keys";
 129
 130                 reset {
 131                         label = "Reset button";
 132                         linux,code = <KEY_RESTART>;
 133                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 134                         debounce-interval = <60>;
 135                 };
 136
 137                 wps {
 138                         label = "WPS button";
 139                         linux,code = <KEY_WPS_BUTTON>;
 140                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 141                         debounce-interval = <60>;
 142                 };
 143         };
 144 };
 145
 146 &pcie {
 147         status = "okay";
 148 };
 149
 150 &uart {
 151         status = "okay";
 152 };
 153
 154 &usb_phy0 {
 155         status = "okay";
 156 };
 157
 158 &usb0 {
 159         #address-cells = <1>;
 160         #size-cells = <0>;
 161         status = "okay";
 162
 163         hub_port0: port@1 {
 164                 reg = <1>;
 165                 #trigger-source-cells = <0>;
 166         };
 167 };
 168
 169 &usb_phy1 {
 170         status = "okay";
 171 };
 172
 173 &usb1 {
 174         #address-cells = <1>;
 175         #size-cells = <0>;
 176         status = "okay";
 177
 178         hub_port1: port@1 {
 179                 reg = <1>;
 180                 #trigger-source-cells = <0>;
 181         };
 182 };
 183
 184 &spi {
 185         status = "okay";
 186
 187         flash@0 {
 188                 compatible = "jedec,spi-nor";
 189                 reg = <0>;
 190                 spi-max-frequency = <25000000>;
 191
 192                 partitions {
 193                         compatible = "fixed-partitions";
 194                         #address-cells = <1>;
 195                         #size-cells = <1>;
 196
 197                         partition@0 {
 198                                 label = "factory-uboot";
 199                                 reg = <0x000000 0x020000>;
 200                                 read-only;
 201                         };
 202
 203                         partition@20000 {
 204                                 label = "u-boot";
 205                                 reg = <0x020000 0x020000>;
 206                                 read-only;
 207                         };
 208
 209                         partition@40000 {
 210                                 label = "firmware";
 211                                 reg = <0x040000 0xec0000>;
 212                                 compatible = "denx,uimage";
 213                         };
 214
 215                         info: partition@f00000 {
 216                                 label = "info";
 217                                 reg = <0xf00000 0x0f0000>;
 218                                 read-only;
 219                         };
 220
 221                         art: partition@ff0000 {
 222                                 label = "art";
 223                                 reg = <0xff0000 0x010000>;
 224                                 read-only;
 225                         };
 226                 };
 227         };
 228 };
 229
 230 &mdio0 {
 231         status = "okay";
 232
 233         phy-mask = <0>;
 234
 235         phy0: ethernet-phy@0 {
 236                 reg = <0>;
 237                 phy-mode = "sgmii";
 238                 qca,mib-poll-interval = <500>;
 239
 240                 qca,ar8327-initvals = <
 241                         0x04 0x80080080 /* PORT0 PAD MODE CTRL */
 242                         0x7c 0x0000007e /* PORT0_STATUS */
 243                         0x94 0x00000200 /* PORT6_STATUS */
 244                         >;
 245         };
 246 };
 247
 248 &eth0 {
 249         status = "okay";
 250
 251         pll-data = <0x03000101 0x00000101 0x00001919>;
 252
 253         phy-mode = "sgmii";
 254         mtd-mac-address = <&info 0x8>;
 255         phy-handle = <&phy0>;
 256 };
 257
 258 &wmac {
 259         status = "okay";
 260
 261         mtd-cal-data = <&art 0x1000>;
 262         mtd-mac-address = <&info 0x8>;
 263 };