target/linux/ath79/dts/qca9563_tplink_archer-x6-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power;
  17                 led-running = &power;
  18                 led-upgrade = &power;
  19         };
  20
  21         leds {
  22                 compatible = "gpio-leds";
  23
  24                 power: power {
  25                         label = "tp-link:green:power";
  26                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  27                         default-state = "on";
  28                 };
  29
  30                 wlan2g {
  31                         label = "tp-link:green:wlan2g";
  32                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy1tpt";
  34                 };
  35
  36                 wlan5g {
  37                         label = "tp-link:green:wlan5g";
  38                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  39                         linux,default-trigger = "phy0tpt";
  40                 };
  41
  42                 lan {
  43                         label = "tp-link:green:lan";
  44                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 wan {
  48                         label = "tp-link:green:wan";
  49                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wan_fail {
  53                         label = "tp-link:amber:wan";
  54                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 wps {
  58                         label = "tp-link:green:wps";
  59                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  60                 };
  61         };
  62
  63         keys {
  64                 compatible = "gpio-keys";
  65
  66                 reset {
  67                         label = "Reset button";
  68                         linux,code = <KEY_RESTART>;
  69                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72
  73                 wps {
  74                         label = "WPS button";
  75                         linux,code = <KEY_WPS_BUTTON>;
  76                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  77                         debounce-interval = <60>;
  78                 };
  79         };
  80 };
  81
  82 &pcie {
  83         status = "okay";
  84 };
  85
  86 &uart {
  87         status = "okay";
  88 };
  89
  90 &gpio {
  91         status = "okay";
  92 };
  93
  94 &spi {
  95         status = "okay";
  96         num-cs = <1>;
  97
  98         flash@0 {
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <25000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         partition@0 {
 109                                 label = "u-boot";
 110                                 reg = <0x000000 0x020000>;
 111                                 read-only;
 112                         };
 113
 114                         mac: partition@20000 {
 115                                 label = "mac";
 116                                 reg = <0x020000 0x010000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@30000 {
 121                                 compatible = "denx,uimage";
 122                                 label = "firmware";
 123                                 reg = <0x030000 0x7a0000>;
 124                         };
 125
 126                         partition@7d0000 {
 127                                 label = "tplink";
 128                                 reg = <0x7d0000 0x020000>;
 129                                 read-only;
 130                         };
 131
 132                         art: partition@7f0000 {
 133                                 label = "art";
 134                                 reg = <0x7f0000 0x010000>;
 135                                 read-only;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &mdio0 {
 142         status = "okay";
 143
 144         phy-mask = <0>;
 145
 146         phy0: ethernet-phy@0 {
 147                 reg = <0>;
 148                 phy-mode = "sgmii";
 149                 qca,mib-poll-interval = <500>;
 150
 151                 qca,ar8327-initvals = <
 152                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 153                         0x7c 0x0000007e /* PORT0_STATUS */
 154                         >;
 155         };
 156 };
 157
 158 &eth0 {
 159         status = "okay";
 160
 161         phy-mode = "sgmii";
 162         mtd-mac-address = <&mac 0x8>;
 163         phy-handle = <&phy0>;
 164 };
 165
 166 &wmac {
 167         status = "okay";
 168
 169         mtd-cal-data = <&art 0x1000>;
 170         mtd-mac-address = <&mac 0x8>;
 171 };