target/linux/ath79/dts/qca9563_tplink_re450-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,re450-v2", "qca,qca9563";
  11         model = "TP-Link RE450 v2";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22                 mdio-gpio0 = &mdio2;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 system: power {
  29                         label = "tp-link:blue:power";
  30                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 wlan2g {
  34                         label = "tp-link:blue:wlan2g";
  35                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39                 wlan5g {
  40                         label = "tp-link:blue:wlan5g";
  41                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 lan_link {
  46                         label = "tp-link:green:lan_link";
  47                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 lan_data {
  51                         label = "tp-link:green:lan_data";
  52                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wps_blue {
  56                         label = "tp-link:blue:wps";
  57                         gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
  58                 };
  59
  60                 wps_red {
  61                         label = "tp-link:red:wps";
  62                         gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
  63                 };
  64         };
  65
  66         keys {
  67                 compatible = "gpio-keys";
  68
  69                 reset {
  70                         label = "Reset button";
  71                         linux,code = <KEY_RESTART>;
  72                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  73                         debounce-interval = <60>;
  74                 };
  75
  76                 power {
  77                         label = "Power button";
  78                         linux,code = <KEY_POWER>;
  79                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  80                         debounce-interval = <60>;
  81                 };
  82
  83                 leds {
  84                         label = "LED control button";
  85                         linux,code = <BTN_0>;
  86                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  87                         debounce-interval = <60>;
  88                 };
  89
  90                 wps {
  91                         label = "WPS button";
  92                         linux,code = <KEY_WPS_BUTTON>;
  93                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  94                         debounce-interval = <60>;
  95                 };
  96         };
  97
  98         mdio2: mdio {
  99                 compatible = "virtual,mdio-gpio";
 100
 101                 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>, /* MDC */
 102                         <&gpio 4 GPIO_ACTIVE_HIGH>; /* MDIO */
 103                 #address-cells = <1>;
 104                 #size-cells = <0>;
 105
 106                 phy0: ethernet-phy@4 {
 107                         reg = <4>;
 108                         device_type = "ethernet-phy";
 109                         reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 110                 };
 111         };
 112 };
 113
 114 &pcie {
 115         status = "okay";
 116 };
 117
 118 &uart {
 119         status = "okay";
 120 };
 121
 122 &gpio {
 123         status = "okay";
 124 };
 125
 126 &spi {
 127         status = "okay";
 128         num-cs = <1>;
 129
 130         flash@0 {
 131                 compatible = "jedec,spi-nor";
 132                 reg = <0>;
 133                 spi-max-frequency = <25000000>;
 134
 135                 partitions {
 136                         compatible = "fixed-partitions";
 137                         #address-cells = <1>;
 138                         #size-cells = <1>;
 139
 140                         partition@0 {
 141                                 label = "u-boot";
 142                                 reg = <0x000000 0x020000>;
 143                                 read-only;
 144                         };
 145
 146                         partition@20000 {
 147                                 compatible = "tplink,firmware";
 148                                 label = "firmware";
 149                                 reg = <0x020000 0x5e0000>;
 150                         };
 151
 152                         partition@600000 {
 153                                 label = "partition-table";
 154                                 reg = <0x600000 0x010000>;
 155                                 read-only;
 156                         };
 157
 158                         info: partition@610000 {
 159                                 label = "info";
 160                                 reg = <0x610000 0x020000>;
 161                                 read-only;
 162                         };
 163
 164                         partition@630000 {
 165                                 label = "config";
 166                                 reg = <0x630000 0x020000>;
 167                                 read-only;
 168                         };
 169
 170                         art: partition@7f0000 {
 171                                 label = "art";
 172                                 reg = <0x7f0000 0x010000>;
 173                                 read-only;
 174                         };
 175                 };
 176         };
 177 };
 178
 179 &eth0 {
 180         status = "okay";
 181         mtd-mac-address = <&info 0x8>;
 182         phy-handle = <&phy0>;
 183 };
 184
 185 &wmac {
 186         status = "okay";
 187         mtd-cal-data = <&art 0x1000>;
 188         mtd-mac-address = <&info 0x8>;
 189 };