target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         gpio_leds: leds {
  22                 compatible = "gpio-leds";
  23
  24                 system: system {
  25                         label = "tp-link:green:system";
  26                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "heartbeat";
  28                 };
  29
  30                 wifi_green {
  31                         label = "tp-link:green:wlan";
  32                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  33                         linux,default-trigger = "phy0tpt";
  34                 };
  35
  36                 wifi_wps {
  37                         label = "tp-link:green:wps";
  38                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 wan {
  42                         label = "tp-link:green:wan";
  43                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan_fail {
  47                         label = "tp-link:orange:wan";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 lan1 {
  52                         label = "tp-link:green:lan1";
  53                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 lan2 {
  57                         label = "tp-link:green:lan2";
  58                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 lan3 {
  62                         label = "tp-link:green:lan3";
  63                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 lan4 {
  67                         label = "tp-link:green:lan4";
  68                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  69                 };
  70         };
  71
  72         keys {
  73                 compatible = "gpio-keys";
  74
  75                 reset {
  76                         label = "Reset button";
  77                         linux,code = <KEY_RESTART>;
  78                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  79                         debounce-interval = <60>;
  80                 };
  81
  82                 wifi {
  83                         label = "RFKILL button";
  84                         linux,code = <KEY_RFKILL>;
  85                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  86                         debounce-interval = <60>;
  87                 };
  88         };
  89 };
  90
  91 &uart {
  92         status = "okay";
  93 };
  94
  95 &gpio {
  96         status = "okay";
  97 };
  98
  99 &mdio0 {
 100         status = "okay";
 101
 102         phy-mask = <0>;
 103         phy0: ethernet-phy@0 {
 104                 reg = <0>;
 105                 phy-mode = "sgmii";
 106                 qca,mib-poll-interval = <500>;
 107
 108                 qca,ar8327-initvals = <
 109                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 110                         0x7c 0x0000007e /* PORT0_STATUS */
 111                 >;
 112         };
 113 };
 114
 115 &eth0 {
 116         status = "okay";
 117
 118         mtd-mac-address = <&info 0x8>;
 119         phy-mode = "sgmii";
 120         phy-handle = <&phy0>;
 121 };
 122
 123 &wmac {
 124         status = "okay";
 125         mtd-cal-data = <&art 0x1000>;
 126         mtd-mac-address = <&info 0x8>;
 127 };