target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-status = &system;
  16         };
  17
  18         gpio_leds: leds {
  19                 compatible = "gpio-leds";
  20
  21                 system: system {
  22                         label = "tp-link:green:system";
  23                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  24                         linux,default-trigger = "heartbeat";
  25                 };
  26
  27                 wifi_green {
  28                         label = "tp-link:green:wlan";
  29                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  30                         default-state = "off";
  31                         linux,default-trigger = "phy0tpt";
  32                 };
  33
  34                 wifi_wps {
  35                         label = "tp-link:green:wps";
  36                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  37                         default-state = "off";
  38                 };
  39
  40                 wan {
  41                         label = "tp-link:green:wan";
  42                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  43                         default-state = "off";
  44                 };
  45
  46                 wan_fail {
  47                         label = "tp-link:orange:wan";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  49                         default-state = "off";
  50                 };
  51
  52                 lan1 {
  53                         label = "tp-link:green:lan1";
  54                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                 };
  57
  58                 lan2 {
  59                         label = "tp-link:green:lan2";
  60                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                 };
  63
  64                 lan3 {
  65                         label = "tp-link:green:lan3";
  66                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  67                         default-state = "off";
  68                 };
  69
  70                 lan4 {
  71                         label = "tp-link:green:lan4";
  72                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  73                         default-state = "off";
  74                 };
  75         };
  76
  77         keys {
  78                 compatible = "gpio-keys";
  79                 #address-cells = <1>;
  80                 #size-cells = <0>;
  81
  82                 reset {
  83                         label = "Reset button";
  84                         linux,code = <KEY_RESTART>;
  85                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  86                         debounce-interval = <60>;
  87                 };
  88
  89                 wifi {
  90                         label = "RFKILL button";
  91                         linux,code = <KEY_RFKILL>;
  92                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  93                         debounce-interval = <60>;
  94                 };
  95         };
  96
  97         gpio-export {
  98                 compatible = "gpio-export";
  99                 #size-cells = <0>;
 100
 101                 gpio_usb_power {
 102                         gpio-export,name = "tp-link:power:usb";
 103                         gpio-export,output = <1>;
 104                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 105                 };
 106         };
 107 };
 108
 109 &uart {
 110         status = "okay";
 111 };
 112
 113 &gpio {
 114         status = "okay";
 115 };
 116
 117 &spi {
 118         status = "okay";
 119         num-cs = <1>;
 120
 121         flash@0 {
 122                 #address-cells = <1>;
 123                 #size-cells = <1>;
 124                 compatible = "jedec,spi-nor";
 125                 reg = <0>;
 126                 spi-max-frequency = <25000000>;
 127
 128                 partitions {
 129                         compatible = "fixed-partitions";
 130                         #address-cells = <1>;
 131                         #size-cells = <1>;
 132
 133                         partition@0 {
 134                                 label = "u-boot";
 135                                 reg = <0x000000 0x020000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@20000 {
 140                                 label = "firmware";
 141                                 reg = <0x020000 0xf30000>;
 142                         };
 143
 144                         info: partition@f50000 {
 145                                 label = "product-info";
 146                                 reg = <0xf50000 0x020000>;
 147                                 read-only;
 148                         };
 149
 150                         partition@f70000 {
 151                                 label = "config";
 152                                 reg = <0xf70000 0x050000>;
 153                                 read-only;
 154                         };
 155
 156                         partition@fc0000 {
 157                                 label = "partition-table";
 158                                 reg = <0xfc0000 0x010000>;
 159                                 read-only;
 160                         };
 161
 162                         partition@fd0000 {
 163                                 label = "logs";
 164                                 reg = <0xfd0000 0x020000>;
 165                                 read-only;
 166                         };
 167
 168                         art: partition@ff0000 {
 169                                 label = "ART";
 170                                 reg = <0xff0000 0x010000>;
 171                                 read-only;
 172                         };
 173                 };
 174         };
 175 };
 176
 177 &mdio0 {
 178         status = "okay";
 179
 180         phy-mask = <0>;
 181         phy0: ethernet-phy@0 {
 182                 reg = <0>;
 183                 phy-mode = "sgmii";
 184
 185                 qca,ar8327-initvals = <
 186                     0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 187                     0x7c 0x0000007e /* PORT0_STATUS */
 188                 >;
 189         };
 190 };
 191
 192 &eth0 {
 193         status = "okay";
 194
 195         mtd-mac-address = <&info 0x8>;
 196         phy-mode = "sgmii";
 197         phy-handle = <&phy0>;
 198 };
 199
 200 &wmac {
 201         status = "okay";
 202         mtd-cal-data = <&art 0x1000>;
 203         mtd-mac-address = <&info 0x8>;
 204 };