target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14                 label-mac-device = &wmac;
  15         };
  16
  17         leds: leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "green:system";
  22                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  23                         linux,default-trigger = "heartbeat";
  24                 };
  25
  26                 wifi_green {
  27                         label = "green:wlan";
  28                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  29                         linux,default-trigger = "phy0tpt";
  30                 };
  31
  32                 wifi_wps {
  33                         label = "green:wps";
  34                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wan {
  38                         label = "green:wan";
  39                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wan_fail {
  43                         label = "orange:wan";
  44                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 lan1 {
  48                         label = "green:lan1";
  49                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 lan2 {
  53                         label = "green:lan2";
  54                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 lan3 {
  58                         label = "green:lan3";
  59                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 lan4 {
  63                         label = "green:lan4";
  64                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70
  71                 reset {
  72                         label = "Reset button";
  73                         linux,code = <KEY_RESTART>;
  74                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  75                         debounce-interval = <60>;
  76                 };
  77
  78                 wifi {
  79                         label = "RFKILL button";
  80                         linux,code = <KEY_RFKILL>;
  81                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  82                         debounce-interval = <60>;
  83                 };
  84         };
  85 };
  86
  87 &uart {
  88         status = "okay";
  89 };
  90
  91 &mdio0 {
  92         status = "okay";
  93
  94         phy-mask = <0>;
  95         phy0: ethernet-phy@0 {
  96                 reg = <0>;
  97                 phy-mode = "sgmii";
  98                 qca,mib-poll-interval = <500>;
  99
 100                 qca,ar8327-initvals = <
 101                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 102                         0x7c 0x0000007e /* PORT0_STATUS */
 103                 >;
 104         };
 105 };
 106
 107 &eth0 {
 108         status = "okay";
 109
 110         mtd-mac-address = <&info 0x8>;
 111         phy-mode = "sgmii";
 112         phy-handle = <&phy0>;
 113 };
 114
 115 &wmac {
 116         status = "okay";
 117
 118         mtd-cal-data = <&art 0x1000>;
 119         mtd-mac-address = <&info 0x8>;
 120 };