target/linux/ath79/dts/qca9563_ubnt-unifiac-lite.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "ubnt,ubnt-unifiac-lite", "qca,qca9563";
  11         model = "Ubiquiti UniFi-AC-LITE/MESH/LR";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x8000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200n8";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 wifi_ac {
  26                         label = "ubnt:white:dome";
  27                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  28                         default-state = "off";
  29                         linux,default-trigger = "phy0tpt";
  30                 };
  31
  32                 wifi_n {
  33                         label = "ubnt:blue:dome";
  34                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  35                         default-state = "off";
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43                 #address-cells = <1>;
  44                 #size-cells = <0>;
  45
  46                 reset {
  47                         label = "Reset button";
  48                         linux,code = <KEY_RESTART>;
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                         debounce-interval = <60>;
  51                 };
  52         };
  53 };
  54
  55 &uart {
  56         status = "okay";
  57 };
  58
  59 &gpio {
  60         status = "okay";
  61 };
  62
  63 &pcie {
  64         status = "okay";
  65 };
  66
  67 &spi {
  68         status = "okay";
  69         num-cs = <1>;
  70
  71         flash@0 {
  72                 #address-cells = <1>;
  73                 #size-cells = <1>;
  74                 compatible = "jedec,spi-nor";
  75                 reg = <0>;
  76                 spi-max-frequency = <25000000>;
  77
  78                 partitions {
  79                         compatible = "fixed-partitions";
  80                         #address-cells = <1>;
  81                         #size-cells = <1>;
  82
  83                         partition@0 {
  84                                 label = "u-boot";
  85                                 reg = <0x000000 0x060000>;
  86                                 read-only;
  87                         };
  88
  89                         partition@60000 {
  90                                 label = "u-boot-env";
  91                                 reg = <0x060000 0x010000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@70000 {
  96                                 label = "firmware";
  97                                 reg = <0x070000 0x790000>;
  98                         };
  99
 100                         partition@800000 {
 101                                 label = "ubnt-airos";
 102                                 reg = <0x800000 0x790000>;
 103                                 read-only;
 104                         };
 105
 106                         partition@f90000 {
 107                                 label = "bs";
 108                                 reg = <0xf90000 0x020000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@fb0000 {
 113                                 label = "cfg";
 114                                 reg = <0xfb0000 0x040000>;
 115                                 read-only;
 116                         };
 117
 118                         eeprom: partition@ff0000 {
 119                                 label = "EEPROM";
 120                                 reg = <0xff0000 0x010000>;
 121                                 read-only;
 122                         };
 123                 };
 124         };
 125 };
 126
 127 &mdio0 {
 128         status = "okay";
 129
 130         phy-mask = <4>;
 131         phy4: ethernet-phy@4 {
 132                 phy-mode = "sgmii";
 133                 reg = <4>;
 134         };
 135 };
 136
 137 &eth0 {
 138         status = "okay";
 139
 140         mtd-mac-address = <&eeprom 0x0>;
 141         phy-handle = <&phy4>;
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146         mtd-cal-data = <&eeprom 0x1000>;
 147         mtd-mac-address = <&eeprom 0x0>;
 148 };