ath79: remove bs-partition ro-flag for UniFi AC devices
[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_ubnt_unifiac.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
5
6 #include "qca956x.dtsi"
7
8 / {
9 chosen {
10 bootargs = "console=ttyS0,115200n8";
11 };
12
13 leds {
14 compatible = "gpio-leds";
15
16 wifi_ac {
17 label = "ubnt:white:dome";
18 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
19 default-state = "off";
20 linux,default-trigger = "phy0tpt";
21 };
22
23 wifi_n {
24 label = "ubnt:blue:dome";
25 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
26 default-state = "off";
27 linux,default-trigger = "phy1tpt";
28 };
29
30 };
31
32 keys {
33 compatible = "gpio-keys";
34 #address-cells = <1>;
35 #size-cells = <0>;
36
37 reset {
38 label = "Reset button";
39 linux,code = <KEY_RESTART>;
40 gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
41 debounce-interval = <60>;
42 };
43 };
44 };
45
46 &uart {
47 status = "okay";
48 };
49
50 &gpio {
51 status = "okay";
52 };
53
54 &pcie {
55 status = "okay";
56 };
57
58 &spi {
59 status = "okay";
60 num-cs = <1>;
61
62 flash@0 {
63 #address-cells = <1>;
64 #size-cells = <1>;
65 compatible = "jedec,spi-nor";
66 reg = <0>;
67 spi-max-frequency = <25000000>;
68
69 partitions {
70 compatible = "fixed-partitions";
71 #address-cells = <1>;
72 #size-cells = <1>;
73
74 partition@0 {
75 label = "u-boot";
76 reg = <0x000000 0x060000>;
77 read-only;
78 };
79
80 partition@60000 {
81 label = "u-boot-env";
82 reg = <0x060000 0x010000>;
83 read-only;
84 };
85
86 partition@70000 {
87 label = "firmware";
88 reg = <0x070000 0x790000>;
89 };
90
91 partition@800000 {
92 label = "ubnt-airos";
93 reg = <0x800000 0x790000>;
94 read-only;
95 };
96
97 partition@f90000 {
98 label = "bs";
99 reg = <0xf90000 0x020000>;
100 };
101
102 partition@fb0000 {
103 label = "cfg";
104 reg = <0xfb0000 0x040000>;
105 read-only;
106 };
107
108 eeprom: partition@ff0000 {
109 label = "EEPROM";
110 reg = <0xff0000 0x010000>;
111 read-only;
112 };
113 };
114 };
115 };
116
117 &wmac {
118 status = "okay";
119 mtd-cal-data = <&eeprom 0x1000>;
120 mtd-mac-address = <&eeprom 0x0>;
121 };