target/linux/ath79/dts/qca9563_ubnt_unifiac.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca956x.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 wifi_ac {
  17                         label = "ubnt:white:dome";
  18                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  19                         default-state = "off";
  20                         linux,default-trigger = "phy0tpt";
  21                 };
  22
  23                 wifi_n {
  24                         label = "ubnt:blue:dome";
  25                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  26                         default-state = "off";
  27                         linux,default-trigger = "phy1tpt";
  28                 };
  29
  30         };
  31
  32         keys {
  33                 compatible = "gpio-keys";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36
  37                 reset {
  38                         label = "Reset button";
  39                         linux,code = <KEY_RESTART>;
  40                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                 };
  43         };
  44 };
  45
  46 &uart {
  47         status = "okay";
  48 };
  49
  50 &gpio {
  51         status = "okay";
  52 };
  53
  54 &pcie {
  55         status = "okay";
  56 };
  57
  58 &spi {
  59         status = "okay";
  60         num-cs = <1>;
  61
  62         flash@0 {
  63                 #address-cells = <1>;
  64                 #size-cells = <1>;
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <25000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x000000 0x060000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@60000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x060000 0x010000>;
  83                                 read-only;
  84                         };
  85
  86                         partition@70000 {
  87                                 label = "firmware";
  88                                 reg = <0x070000 0x790000>;
  89                         };
  90
  91                         partition@800000 {
  92                                 label = "ubnt-airos";
  93                                 reg = <0x800000 0x790000>;
  94                                 read-only;
  95                         };
  96
  97                         partition@f90000 {
  98                                 label = "bs";
  99                                 reg = <0xf90000 0x020000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@fb0000 {
 104                                 label = "cfg";
 105                                 reg = <0xfb0000 0x040000>;
 106                                 read-only;
 107                         };
 108
 109                         eeprom: partition@ff0000 {
 110                                 label = "EEPROM";
 111                                 reg = <0xff0000 0x010000>;
 112                                 read-only;
 113                         };
 114                 };
 115         };
 116 };
 117
 118 &wmac {
 119         status = "okay";
 120         mtd-cal-data = <&eeprom 0x1000>;
 121         mtd-mac-address = <&eeprom 0x0>;
 122 };