target/linux/au1000/patches-2.6.32/005-mtx1_fix_pci.patch

   1
   2
   3 diff --git a/arch/mips/alchemy/mtx-1/board_setup.c
   4 b/arch/mips/alchemy/mtx-1/board_setup.c
   5 index 45b61c9..17140ac 100644
   6 --- a/arch/mips/alchemy/mtx-1/board_setup.c
   7 +++ b/arch/mips/alchemy/mtx-1/board_setup.c
   8 @@ -56,8 +56,6 @@ void __init board_setup(void)
   9         }
  10  #endif
  11
  12 -       alchemy_gpio2_enable();
  13 -
  14  #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  15         /* Enable USB power switch */
  16         alchemy_gpio_direction_output(204, 0);
  17 @@ -92,20 +90,12 @@ void __init board_setup(void)
  18  int
  19  mtx1_pci_idsel(unsigned int devsel, int assert)
  20  {
  21 -#define MTX_IDSEL_ONLY_0_AND_3 0
  22 -#if MTX_IDSEL_ONLY_0_AND_3
  23 -       if (devsel != 0 && devsel != 3) {
  24 -               printk(KERN_ERR "*** not 0 or 3\n");
  25 -               return 0;
  26 -       }
  27 -#endif
  28 -
  29         if (assert && devsel != 0)
  30                 /* Suppress signal to Cardbus */
  31                 gpio_set_value(1, 0);   /* set EXT_IO3 OFF */
  32         else
  33                 gpio_set_value(1, 1);   /* set EXT_IO3 ON */
  34
  35 -       au_sync_udelay(1);
  36 +       udelay(1);
  37         return 1;
  38  }