prepare for the transition to linux 2.6.22 - make it possible to override the kernel...
[openwrt/openwrt.git] / target / linux / avr32-2.6 / config / default
1 CONFIG_AP7000_16_BIT_SMC=y
2 # CONFIG_AP7000_32_BIT_SMC is not set
3 # CONFIG_AP7000_8_BIT_SMC is not set
4 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
5 # CONFIG_ATM_DRIVERS is not set
6 CONFIG_AVR32=y
7 CONFIG_BOARD_ATNGW100=y
8 # CONFIG_BOARD_ATSTK1000 is not set
9 # CONFIG_BT is not set
10 CONFIG_CPU_AT32AP7000=y
11 CONFIG_DW_DMAC=y
12 CONFIG_ENTRY_ADDRESS=0x90000000
13 # CONFIG_GEN_RTC is not set
14 # CONFIG_HZ_100 is not set
15 CONFIG_HZ=250
16 CONFIG_HZ_250=y
17 # CONFIG_HW_RANDOM is not set
18 # CONFIG_I2C is not set
19 # CONFIG_IDE is not set
20 CONFIG_INITRAMFS_SOURCE=""
21 CONFIG_MACB=y
22 # CONFIG_MTD_ABSENT is not set
23 CONFIG_MTD_BLKDEVS=y
24 # CONFIG_MTD_BLOCK2MTD is not set
25 CONFIG_MTD_BLOCK=y
26 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
27 CONFIG_MTD_CFI_AMDSTD=y
28 CONFIG_MTD_CFI_I1=y
29 CONFIG_MTD_CFI_I2=y
30 # CONFIG_MTD_CFI_I4 is not set
31 # CONFIG_MTD_CFI_I8 is not set
32 # CONFIG_MTD_CFI_INTELEXT is not set
33 # CONFIG_MTD_CFI_STAA is not set
34 CONFIG_MTD_CFI_UTIL=y
35 CONFIG_MTD_CFI=y
36 CONFIG_MTD_CHAR=y
37 CONFIG_MTD_CMDLINE_PARTS=y
38 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
39 # CONFIG_MTD_CONCAT is not set
40 CONFIG_MTD_DATAFLASH=y
41 # CONFIG_MTD_DEBUG is not set
42 # CONFIG_MTD_DOC2000 is not set
43 # CONFIG_MTD_DOC2001 is not set
44 # CONFIG_MTD_DOC2001PLUS is not set
45 CONFIG_MTD_GEN_PROBE=y
46 # CONFIG_MTD_JEDECPROBE is not set
47 # CONFIG_MTD_M25P80 is not set
48 # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
49 CONFIG_MTD_MAP_BANK_WIDTH_1=y
50 CONFIG_MTD_MAP_BANK_WIDTH_2=y
51 # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
52 CONFIG_MTD_MAP_BANK_WIDTH_4=y
53 # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
54 # CONFIG_MTD_MTDRAM is not set
55 # CONFIG_MTD_NAND is not set
56 # CONFIG_NETDEV_1000 is not set
57 # CONFIG_MTD_OBSOLETE_CHIPS is not set
58 # CONFIG_MTD_ONENAND is not set
59 CONFIG_MTD_PARTITIONS=y
60 # CONFIG_MTD_PHRAM is not set
61 CONFIG_MTD_PHYSMAP_BANKWIDTH=2
62 CONFIG_MTD_PHYSMAP_LEN=0x0
63 CONFIG_MTD_PHYSMAP_START=0x80000000
64 CONFIG_MTD_PHYSMAP=y
65 # CONFIG_MTD_PLATRAM is not set
66 # CONFIG_MTD_RAM is not set
67 # CONFIG_MTD_REDBOOT_PARTS is not set
68 # CONFIG_MTD_ROM is not set
69 # CONFIG_MTD_SLRAM is not set
70 CONFIG_MTD_SPLIT_ROOTFS=y
71 CONFIG_MTD=y
72 # CONFIG_OWNERSHIP_TRACE is not set
73 CONFIG_PHYS_OFFSET=0x10000000
74 CONFIG_PLATFORM_AT32AP=y
75 # CONFIG_RTC is not set
76 # CONFIG_SERIAL_8250 is not set
77 CONFIG_SERIAL_ATMEL_CONSOLE=y
78 # CONFIG_SERIAL_ATMEL_TTYAT is not set
79 CONFIG_SERIAL_ATMEL=y
80 # CONFIG_SPI_AT25 is not set
81 CONFIG_SPI_ATMEL=y
82 # CONFIG_SPI_BITBANG is not set
83 # CONFIG_SPI_DEBUG is not set
84 CONFIG_SPI_MASTER=y
85 # CONFIG_SPI_SPIDEV is not set
86 CONFIG_SPI=y
87 CONFIG_SUBARCH_AVR32B=y
88 # CONFIG_UNUSED_SYMBOLS is not set
89 # CONFIG_WATCHDOG is not set