target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch

   1 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
   2 Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
   3 MIME-Version: 1.0
   4 Content-Type: text/plain; charset=UTF-8
   5 Content-Transfer-Encoding: 8bit
   6
   7 Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
   8 ---
   9 --- a/arch/arm/boot/dts/Makefile
  10 +++ b/arch/arm/boot/dts/Makefile
  11 @@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  12         bcm4708-asus-rt-ac56u.dtb \
  13         bcm4708-asus-rt-ac68u.dtb \
  14         bcm4708-buffalo-wzr-1750dhp.dtb \
  15 +       bcm4708-linksys-ea6300-v1.dtb \
  16         bcm4708-luxul-xwc-1000.dtb \
  17         bcm4708-netgear-r6250.dtb \
  18         bcm4708-netgear-r6300-v2.dtb \
  19 --- /dev/null
  20 +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
  21 @@ -0,0 +1,48 @@
  22 +/*
  23 + * Broadcom BCM470X / BCM5301X ARM platform code.
  24 + * DTS for Linksys EA6300 V1
  25 + *
  26 + * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  27 + *
  28 + * Licensed under the GNU/GPL. See COPYING for details.
  29 + */
  30 +
  31 +/dts-v1/;
  32 +
  33 +#include "bcm4708.dtsi"
  34 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  35 +
  36 +/ {
  37 +       compatible = "linksys,ea6300v1", "brcm,bcm4708";
  38 +       model = "Linksys EA6300 V1";
  39 +
  40 +       chosen {
  41 +               bootargs = "console=ttyS0,115200";
  42 +       };
  43 +
  44 +       memory {
  45 +               reg = <0x00000000 0x08000000>;
  46 +       };
  47 +
  48 +       gpio-keys {
  49 +               compatible = "gpio-keys";
  50 +               #address-cells = <1>;
  51 +               #size-cells = <0>;
  52 +
  53 +               wps {
  54 +                       label = "WPS";
  55 +                       linux,code = <KEY_WPS_BUTTON>;
  56 +                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  57 +               };
  58 +
  59 +               restart {
  60 +                       label = "Reset";
  61 +                       linux,code = <KEY_RESTART>;
  62 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
  63 +               };
  64 +       };
  65 +};
  66 +
  67 +&uart0 {
  68 +       status = "okay";
  69 +};