target/linux/bcm53xx/patches-4.9/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch

   1 From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
   2 From: Dan Haab <dhaab@luxul.com>
   3 Date: Mon, 9 Oct 2017 09:46:23 -0600
   4 Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
   5 MIME-Version: 1.0
   6 Content-Type: text/plain; charset=UTF-8
   7 Content-Transfer-Encoding: 8bit
   8
   9 This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
  10 board design.
  11
  12 Signed-off-by: Dan Haab <dhaab@luxul.com>
  13 Acked-by: Rafał Miłecki <rafal@milecki.pl>
  14 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  15 ---
  16  arch/arm/boot/dts/Makefile                    |  1 +
  17  arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
  18  2 files changed, 64 insertions(+)
  19  create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
  20
  21 --- a/arch/arm/boot/dts/Makefile
  22 +++ b/arch/arm/boot/dts/Makefile
  23 @@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  24         bcm4709-tplink-archer-c9-v1.dtb \
  25         bcm47094-dlink-dir-885l.dtb \
  26         bcm47094-linksys-panamera.dtb \
  27 +       bcm47094-luxul-abr-4500.dtb \
  28         bcm47094-luxul-xbr-4500.dtb \
  29         bcm47094-luxul-xwr-3100.dtb \
  30         bcm47094-netgear-r8500.dtb \
  31 --- /dev/null
  32 +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
  33 @@ -0,0 +1,63 @@
  34 +/*
  35 + * Copyright (C) 2017 Luxul Inc.
  36 + *
  37 + * Licensed under the ISC license.
  38 + */
  39 +
  40 +/dts-v1/;
  41 +
  42 +#include "bcm4708.dtsi"
  43 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  44 +
  45 +/ {
  46 +       compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
  47 +       model = "Luxul ABR-4500 V1";
  48 +
  49 +       chosen {
  50 +               bootargs = "earlycon";
  51 +       };
  52 +
  53 +       memory {
  54 +               reg = <0x00000000 0x08000000
  55 +                      0x88000000 0x18000000>;
  56 +       };
  57 +
  58 +       leds {
  59 +               compatible = "gpio-leds";
  60 +
  61 +               status {
  62 +                       label = "bcm53xx:green:status";
  63 +                       gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
  64 +                       linux,default-trigger = "timer";
  65 +               };
  66 +
  67 +               usb3 {
  68 +                       label = "bcm53xx:green:usb3";
  69 +                       gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
  70 +                       trigger-sources = <&ohci_port1>, <&ehci_port1>,
  71 +                               <&xhci_port1>;
  72 +                       linux,default-trigger = "usbport";
  73 +               };
  74 +
  75 +       };
  76 +
  77 +       gpio-keys {
  78 +               compatible = "gpio-keys";
  79 +               #address-cells = <1>;
  80 +               #size-cells = <0>;
  81 +
  82 +               restart {
  83 +                       label = "Reset";
  84 +                       linux,code = <KEY_RESTART>;
  85 +                       gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
  86 +               };
  87 +       };
  88 +};
  89 +
  90 +&usb3 {
  91 +       vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
  92 +};
  93 +
  94 +&spi_nor {
  95 +       status = "okay";
  96 +};