target/linux/brcm2708/patches-3.18/0101-BCM270x_DT-Add-i2c0_baudrate-and-i2c1_baudrate-param.patch

   1 From 2a725b6c8a9f4454363a73acb34c6cfff9390911 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.org>
   3 Date: Tue, 3 Feb 2015 11:41:38 +0000
   4 Subject: [PATCH 101/114] BCM270x_DT: Add i2c0_baudrate and i2c1_baudrate
   5  parameters
   6
   7 ---
   8  arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 2 ++
   9  arch/arm/boot/dts/bcm2708-rpi-b.dts      | 2 ++
  10  arch/arm/boot/dts/bcm2709-rpi-2-b.dts    | 2 ++
  11  3 files changed, 6 insertions(+)
  12
  13 --- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
  14 +++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
  15 @@ -93,6 +93,8 @@
  16                 spi = <&spi0>,"status";
  17                 i2c0 = <&i2c0>,"status";
  18                 i2c1 = <&i2c1>,"status";
  19 +               i2c0_baudrate = <&i2c0>,"clock-frequency:0";
  20 +               i2c1_baudrate = <&i2c1>,"clock-frequency:0";
  21
  22                 act_led_gpio = <&act_led>,"gpios:4";
  23                 act_led_activelow = <&act_led>,"gpios:8";
  24 --- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
  25 +++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
  26 @@ -93,6 +93,8 @@
  27                 spi = <&spi0>,"status";
  28                 i2c0 = <&i2c0>,"status";
  29                 i2c1 = <&i2c1>,"status";
  30 +               i2c0_baudrate = <&i2c0>,"clock-frequency:0";
  31 +               i2c1_baudrate = <&i2c1>,"clock-frequency:0";
  32
  33                 act_led_gpio = <&act_led>,"gpios:4";
  34                 act_led_activelow = <&act_led>,"gpios:8";
  35 --- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
  36 +++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
  37 @@ -93,6 +93,8 @@
  38                 spi = <&spi0>,"status";
  39                 i2c0 = <&i2c0>,"status";
  40                 i2c1 = <&i2c1>,"status";
  41 +               i2c0_baudrate = <&i2c0>,"clock-frequency:0";
  42 +               i2c1_baudrate = <&i2c1>,"clock-frequency:0";
  43
  44                 act_led_gpio = <&act_led>,"gpios:4";
  45                 act_led_activelow = <&act_led>,"gpios:8";