target/linux/brcm2708/patches-4.4/0014-bcm2835-i2s-get-base-address-for-DMA-from-devicetree.patch

   1 From 208e73d0e230d021c7b1d778451cbaa6074e6969 Mon Sep 17 00:00:00 2001
   2 From: Matthias Reichl <hias@horus.com>
   3 Date: Sun, 11 Oct 2015 16:44:05 +0200
   4 Subject: [PATCH 014/381] bcm2835-i2s: get base address for DMA from devicetree
   5
   6 Code copied from spi-bcm2835. Get physical address from devicetree
   7 instead of using hardcoded constant.
   8
   9 Signed-off-by: Matthias Reichl <hias@horus.com>
  10 ---
  11  sound/soc/bcm/bcm2835-i2s.c | 20 ++++++++++++--------
  12  1 file changed, 12 insertions(+), 8 deletions(-)
  13
  14 --- a/sound/soc/bcm/bcm2835-i2s.c
  15 +++ b/sound/soc/bcm/bcm2835-i2s.c
  16 @@ -38,6 +38,7 @@
  17  #include <linux/delay.h>
  18  #include <linux/io.h>
  19  #include <linux/clk.h>
  20 +#include <linux/of_address.h>
  21
  22  #include <sound/core.h>
  23  #include <sound/pcm.h>
  24 @@ -158,10 +159,6 @@ static const unsigned int bcm2835_clk_fr
  25  #define BCM2835_I2S_INT_RXR            BIT(1)
  26  #define BCM2835_I2S_INT_TXW            BIT(0)
  27
  28 -/* I2S DMA interface */
  29 -/* FIXME: Needs IOMMU support */
  30 -#define BCM2835_VCMMU_SHIFT            (0x7E000000 - 0x20000000)
  31 -
  32  /* General device struct */
  33  struct bcm2835_i2s_dev {
  34         struct device                           *dev;
  35 @@ -791,6 +788,15 @@ static int bcm2835_i2s_probe(struct plat
  36         int ret;
  37         struct regmap *regmap[2];
  38         struct resource *mem[2];
  39 +       const __be32 *addr;
  40 +       dma_addr_t dma_reg_base;
  41 +
  42 +       addr = of_get_address(pdev->dev.of_node, 0, NULL, NULL);
  43 +       if (!addr) {
  44 +               dev_err(&pdev->dev, "could not get DMA-register address\n");
  45 +               return -ENODEV;
  46 +       }
  47 +       dma_reg_base = be32_to_cpup(addr);
  48
  49         /* Request both ioareas */
  50         for (i = 0; i <= 1; i++) {
  51 @@ -817,12 +823,10 @@ static int bcm2835_i2s_probe(struct plat
  52
  53         /* Set the DMA address */
  54         dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr =
  55 -               (dma_addr_t)mem[0]->start + BCM2835_I2S_FIFO_A_REG
  56 -                                         + BCM2835_VCMMU_SHIFT;
  57 +               dma_reg_base + BCM2835_I2S_FIFO_A_REG;
  58
  59         dev->dma_data[SNDRV_PCM_STREAM_CAPTURE].addr =
  60 -               (dma_addr_t)mem[0]->start + BCM2835_I2S_FIFO_A_REG
  61 -                                         + BCM2835_VCMMU_SHIFT;
  62 +               dma_reg_base + BCM2835_I2S_FIFO_A_REG;
  63
  64         /* Set the bus width */
  65         dev->dma_data[SNDRV_PCM_STREAM_PLAYBACK].addr_width =