target/linux/brcm63xx/dts/a226g.dts

   1 /dts-v1/;
   2
   3 #include "bcm6358.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Pirelli A226G";
   9         compatible = "pirelli,a226g", "brcm,bcm6358";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 wps {
  23                         label = "wps";
  24                         gpios = <&pinctrl 34 1>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&pinctrl 37 1>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 voip_red {
  38                         label = "DWV-S0:red:VoIP";
  39                         gpios = <&pinctrl 0 1>;
  40                 };
  41                 eth_red {
  42                         label = "DWV-S0:red:ethernet";
  43                         gpios = <&pinctrl 1 1>;
  44                 };
  45                 dsl_green {
  46                         label = "DWV-S0:green:ADSL";
  47                         gpios = <&pinctrl 2 1>;
  48                 };
  49                 usb_green {
  50                         label = "DWV-S0:green:USB";
  51                         gpios = <&pinctrl 3 1>;
  52                 };
  53                 power_green {
  54                         label = "DWV-S0:green:power";
  55                         gpios = <&pinctrl 4 1>;
  56                         default-state = "on";
  57                 };
  58                 power_red {
  59                         label = "DWV-S0:red:power";
  60                         gpios = <&pinctrl 5 1>;
  61                 };
  62                 inet_red {
  63                         label = "DWV-S0:red:internet";
  64                         gpios = <&pinctrl 6 1>;
  65                 };
  66                 inet_green {
  67                         label = "DWV-S0:green:internet";
  68                         gpios = <&pinctrl 7 1>;
  69                 };
  70                 eth_green {
  71                         label = "DWV-S0:green:ethernet";
  72                         gpios = <&pinctrl 8 1>;
  73                 };
  74                 voip_green {
  75                         label = "DWV-S0:green:VoIP";
  76                         gpios = <&pinctrl 9 1>;
  77                 };
  78                 wifi_red {
  79                         label = "DWV-S0:red:wifi";
  80                         gpios = <&pinctrl 10 1>;
  81                 };
  82                 usb_red {
  83                         label = "DWV-S0:red:USB";
  84                         gpios = <&pinctrl 11 1>;
  85                 };
  86                 dsl_red {
  87                         label = "DWV-S0:red:ADSL";
  88                         gpios = <&pinctrl 12 1>;
  89                 };
  90         };
  91 };
  92
  93 &pflash {
  94         status = "ok";
  95
  96         linux,part-probe = "bcm63xxpart";
  97
  98         cfe@0 {
  99                 label = "CFE";
 100                 reg = <0x000000 0x010000>;
 101                 read-only;
 102         };
 103
 104         linux@10000 {
 105                 label = "linux";
 106                 reg = <0x010000 0x7e0000>;
 107         };
 108
 109         nvram@7f0000 {
 110                 label = "nvram";
 111                 reg = <0x7f0000 0x010000>;
 112         };
 113 };