target/linux/brcm63xx/dts/a4001n1.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ADB P.DG A4001N1";
   9         compatible = "adb,a4001n1", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&pinctrl 23 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27                 wps {
  28                         label = "wlan";
  29                         gpios = <&pinctrl 24 1>;
  30                         linux,code = <KEY_WLAN>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 inet_red {
  38                         label = "A4001N1:red:inet";
  39                         gpios = <&pinctrl 2 1>;
  40                 };
  41                 ppp_green {
  42                         label = "A4001N1:green:ppp";
  43                         gpios = <&pinctrl 3 1>;
  44                 };
  45                 power_green {
  46                         label = "A4001N1:green:power";
  47                         gpios = <&pinctrl 4 1>;
  48                         default-state = "on";
  49                 };
  50                 ppp_red {
  51                         label = "A4001N1:red:ppp";
  52                         gpios = <&pinctrl 5 1>;
  53                 };
  54                 usb_green {
  55                         label = "A4001N1:green:3g";
  56                         gpios = <&pinctrl 6 1>;
  57                 };
  58                 usb_red {
  59                         label = "A4001N1:red:3g";
  60                         gpios = <&pinctrl 7 1>;
  61                 };
  62                 power_red {
  63                         label = "A4001N1:red:power";
  64                         gpios = <&pinctrl 8 1>;
  65                 };
  66                 wlan_green {
  67                         label = "A4001N1:green:wlan";
  68                         gpios = <&pinctrl 9 1>;
  69                 };
  70                 wlan_red {
  71                         label = "A4001N1:red:wlan";
  72                         gpios = <&pinctrl 10 1>;
  73                 };
  74                 inet_green {
  75                         label = "A4001N1:green:inet";
  76                         gpios = <&pinctrl 11 1>;
  77                 };
  78                 eth_red {
  79                         label = "A4001N1:red:eth";
  80                         gpios = <&pinctrl 20 1>;
  81                 };
  82                 eth_green {
  83                         label = "A4001N1:green:eth";
  84                         gpios = <&pinctrl 31 1>;
  85                 };
  86         };
  87 };
  88
  89 &hsspi {
  90         status = "ok";
  91
  92         flash@0 {
  93                 compatible = "jedec,spi-nor";
  94                 spi-max-frequency = <16666667>;
  95                 spi-tx-bus-width = <2>;
  96                 spi-rx-bus-width = <2>;
  97                 reg = <0>;
  98
  99                 #address-cells = <1>;
 100                 #size-cells = <1>;
 101
 102                 linux,part-probe = "bcm63xxpart";
 103
 104                 cfe@0 {
 105                         reg = <0x000000 0x010000>;
 106                         label = "cfe";
 107                         read-only;
 108                 };
 109
 110                 linux@10000 {
 111                         reg = <0x010000 0xfe0000>;
 112                         label = "linux";
 113                 };
 114
 115                 nvram@ff0000 {
 116                         reg = <0xff0000 0x010000>;
 117                         label = "nvram";
 118                 };
 119         };
 120 };