target/linux/brcm63xx/dts/ar-5387un.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend AR-5387un";
   9         compatible = "comtrend,ar-5387un", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 23 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 inet_red {
  34                         label = "AR-5387un:red:inet";
  35                         gpios = <&pinctrl 1 0>;
  36                 };
  37                 power_red {
  38                         label = "AR-5387un:red:power";
  39                         gpios = <&pinctrl 4 0>;
  40                 };
  41                 inet_green {
  42                         label = "AR-5387un:green:inet";
  43                         gpios = <&pinctrl 7 0>;
  44                 };
  45                 power_green {
  46                         label = "AR-5387un:green:power";
  47                         gpios = <&pinctrl 8 0>;
  48                         default-state = "on";
  49                 };
  50                 dsl_green {
  51                         label = "AR-5387un:green:dsl";
  52                         gpios = <&pinctrl 11 1>;
  53                 };
  54         };
  55 };
  56
  57 &hsspi {
  58         status = "ok";
  59
  60         flash@0 {
  61                 compatible = "jedec,spi-nor";
  62                 spi-max-frequency = <16666667>;
  63                 spi-tx-bus-width = <2>;
  64                 spi-rx-bus-width = <2>;
  65                 reg = <0>;
  66
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69
  70                 linux,part-probe = "bcm63xxpart";
  71
  72                 partitions {
  73                         compatible = "fixed-partitions";
  74                         #address-cells = <1>;
  75                         #size-cells = <1>;
  76
  77                         cfe@0 {
  78                                 reg = <0x000000 0x010000>;
  79                                 label = "cfe";
  80                                 read-only;
  81                         };
  82
  83                         linux@10000 {
  84                                 reg = <0x010000 0xfe0000>;
  85                                 label = "linux";
  86                                 compatible = "brcm,bcm963xx-imagetag";
  87                         };
  88
  89                         nvram@ff0000 {
  90                                 reg = <0xff0000 0x010000>;
  91                                 label = "nvram";
  92                         };
  93                 };
  94         };
  95 };
  96
  97 &uart0 {
  98         status = "ok";
  99 };