target/linux/brcm63xx/dts/dsl-274xb-f.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "D-Link DSL-2740B/DSL-2741B rev F1";
   9         compatible = "d-link,dsl-274xb-f", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 wifi {
  23                         label = "wifi";
  24                         gpios = <&pinctrl 10 1>;
  25                         linux,code = <KEY_WLAN>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 23 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 24 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 inet_red {
  48                         label = "dsl-274xb:red:internet";
  49                         gpios = <&pinctrl 2 1>;
  50                 };
  51                 dsl_green {
  52                         label = "dsl-274xb:green:dsl";
  53                         gpios = <&pinctrl 3 1>;
  54                 };
  55                 power_green {
  56                         label = "dsl-274xb:green:power";
  57                         gpios = <&pinctrl 4 1>;
  58                         default-state = "on";
  59                 };
  60                 power_red {
  61                         label = "dsl-274xb:red:power";
  62                         gpios = <&pinctrl 8 1>;
  63                 };
  64                 wps_blue {
  65                         label = "dsl-274xb:blue:wps";
  66                         gpios = <&pinctrl 9 1>;
  67                 };
  68                 inet_green {
  69                         label = "dsl-274xb:green:internet";
  70                         gpios = <&pinctrl 11 1>;
  71                 };
  72         };
  73 };
  74
  75 &hsspi {
  76         status = "ok";
  77
  78         flash@0 {
  79                 compatible = "jedec,spi-nor";
  80                 spi-max-frequency = <16666667>;
  81                 spi-tx-bus-width = <2>;
  82                 spi-rx-bus-width = <2>;
  83                 reg = <0>;
  84
  85                 #address-cells = <1>;
  86                 #size-cells = <1>;
  87
  88                 partitions {
  89                         compatible = "fixed-partitions";
  90                         #address-cells = <1>;
  91                         #size-cells = <1>;
  92
  93                         cfe@0 {
  94                                 reg = <0x000000 0x010000>;
  95                                 label = "cfe";
  96                                 read-only;
  97                         };
  98
  99                         linux@10000 {
 100                                 reg = <0x010000 0x7c0000>;
 101                                 label = "linux";
 102                                 compatible = "brcm,bcm963xx-imagetag";
 103                         };
 104
 105                         cal_data@7d0000 {
 106                                 reg = <0x7d0000 0x010000>;
 107                                 label = "cal_data";
 108                                 read-only;
 109                         };
 110
 111                         nvram@7e0000 {
 112                                 reg = <0x7e0000 0x020000>;
 113                                 label = "nvram";
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &uart0 {
 120         status = "ok";
 121 };