target/linux/brcm63xx/dts/fast2504n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6362.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2504n";
   9         compatible = "sagem,f@st2504n", "brcm,bcm6362";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&gpio0 24 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27                 wps {
  28                         label = "wps";
  29                         gpios = <&gpio0 25 1>;
  30                         linux,code = <KEY_WPS_BUTTON>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 power_orange {
  38                         label = "fast2504n:orange:power";
  39                         gpios = <&gpio0 2 1>;
  40                 };
  41                 power_green {
  42                         label = "fast2504n:green:power";
  43                         gpios = <&gpio0 10 1>;
  44                         default-state = "on";
  45                 };
  46                 inet_red {
  47                         label = "fast2504n:red:internet";
  48                         gpios = <&gpio0 26 1>;
  49                 };
  50                 ok_green {
  51                         label = "fast2504n:green:ok";
  52                         gpios = <&gpio0 28 1>;
  53                 };
  54                 ok_orange {
  55                         label = "fast2504n:orange:ok";
  56                         gpios = <&gpio0 29 1>;
  57                 };
  58                 wlan_orangee {
  59                         label = "fast2504n:orange:wlan";
  60                         gpios = <&gpio0 30 1>;
  61                 };
  62         };
  63 };
  64
  65 &hsspi {
  66         status = "ok";
  67
  68         flash@0 {
  69                 compatible = "jedec,spi-nor";
  70                 spi-max-frequency = <20000000>;
  71                 spi-tx-bus-width = <2>;
  72                 spi-rx-bus-width = <2>;
  73                 reg = <0>;
  74
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77
  78                 linux,part-probe = "bcm63xxpart";
  79
  80                 cfe@0 {
  81                         reg = <0x000000 0x010000>;
  82                         label = "cfe";
  83                         read-only;
  84                 };
  85
  86                 linux@10000 {
  87                         reg = <0x010000 0x7e0000>;
  88                         label = "linux";
  89                 };
  90
  91                 nvram@7f0000 {
  92                         reg = <0x7f0000 0x010000>;
  93                         label = "nvram";
  94                 };
  95         };
  96 };