target/linux/brcm63xx/dts/fast2704v2.dts

   1 /dts-v1/;
   2
   3 #include "bcm6328.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2704V2";
   9         compatible = "sagem,f@st2704v2", "brcm,bcm6328";
  10
  11         chosen {
  12                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         keys {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21
  22                 rfkill {
  23                         label = "rfkill";
  24                         gpios = <&pinctrl 15 1>;
  25                         linux,code = <KEY_WLAN>;
  26                         debounce-interval = <60>;
  27                 };
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&pinctrl 23 1>;
  32                         linux,code = <KEY_RESTART>;
  33                         debounce-interval = <60>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&pinctrl 24 1>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         debounce-interval = <60>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 usb_green {
  48                         label = "F@ST2704V2:green:usb";
  49                         gpios = <&pinctrl 1 1>;
  50                 };
  51                 inet_red {
  52                         label = "F@ST2704V2:red:inet";
  53                         gpios = <&pinctrl 2 1>;
  54                 };
  55                 dsl_green {
  56                         label = "F@ST2704V2:green:dsl";
  57                         gpios = <&pinctrl 3 1>;
  58                 };
  59                 power_green {
  60                         label = "F@ST2704V2:green:power";
  61                         gpios = <&pinctrl 4 1>;
  62                         default-state = "on";
  63                 };
  64                 power_red {
  65                         label = "F@ST2704V2:red:power";
  66                         gpios = <&pinctrl 5 1>;
  67                 };
  68                 wps_green {
  69                         label = "F@ST2704V2:green:wps";
  70                         gpios = <&pinctrl 10 1>;
  71                 };
  72                 inet_green {
  73                         label = "F@ST2704V2:green:inet";
  74                         gpios = <&pinctrl 11 1>;
  75                 };
  76         };
  77 };
  78
  79 &hsspi {
  80         status = "ok";
  81
  82         flash@0 {
  83                 compatible = "jedec,spi-nor";
  84                 spi-max-frequency = <16666667>;
  85                 spi-tx-bus-width = <2>;
  86                 spi-rx-bus-width = <2>;
  87                 reg = <0>;
  88
  89                 #address-cells = <1>;
  90                 #size-cells = <1>;
  91
  92                 partitions {
  93                         compatible = "fixed-partitions";
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96
  97                         cfe@0 {
  98                                 reg = <0x000000 0x010000>;
  99                                 label = "cfe";
 100                                 read-only;
 101                         };
 102
 103                         linux@10000 {
 104                                 reg = <0x010000 0x7e0000>;
 105                                 label = "linux";
 106                                 compatible = "brcm,bcm963xx-imagetag";
 107                         };
 108
 109                         nvram@7f0000 {
 110                                 reg = <0x7f0000 0x010000>;
 111                                 label = "nvram";
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &uart0 {
 118         status = "ok";
 119 };