brcm63xx: drop root parameter from cmdline
[openwrt/openwrt.git] / target / linux / brcm63xx / dts / hg553.dts
1 /dts-v1/;
2
3 #include "bcm6358.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 model = "Huawei EchoLife HG553";
9 compatible = "huawei,hg553", "brcm,bcm6358";
10
11 chosen {
12 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
13 stdout-path = "serial0:115200n8";
14 };
15
16 gpio-keys-polled {
17 compatible = "gpio-keys-polled";
18 #address-cells = <1>;
19 #size-cells = <0>;
20 poll-interval = <20>;
21 debounce-interval = <60>;
22
23 rfkill {
24 label = "rfkill";
25 gpios = <&pinctrl 9 1>;
26 linux,code = <KEY_RFKILL>;
27 };
28
29 reset {
30 label = "reset";
31 gpios = <&pinctrl 37 1>;
32 linux,code = <KEY_RESTART>;
33 };
34 };
35
36 gpio-leds {
37 compatible = "gpio-leds";
38
39 power_green {
40 label = "HW553:blue:power";
41 gpios = <&pinctrl 4 1>;
42 default-state = "on";
43 };
44 power_red {
45 label = "HW553:red:power";
46 gpios = <&pinctrl 5 1>;
47 };
48 hspa_red {
49 label = "HW553:red:hspa";
50 gpios = <&pinctrl 12 1>;
51 };
52 hspa_blue {
53 label = "HW553:blue:hspa";
54 gpios = <&pinctrl 13 1>;
55 };
56 lan_red {
57 label = "HW553:red:lan";
58 gpios = <&pinctrl 22 1>;
59 };
60 lan_blue {
61 label = "HW553:blue:lan";
62 gpios = <&pinctrl 23 1>;
63 };
64 wifi_red {
65 label = "HW553:red:wifi";
66 gpios = <&pinctrl 25 1>;
67 };
68 dsl_red {
69 label = "HW553:red:adsl";
70 gpios = <&pinctrl 34 1>;
71 };
72 dsl_blue {
73 label = "HW553:blue:adsl";
74 gpios = <&pinctrl 35 1>;
75 };
76 };
77 };
78
79 &pflash {
80 status = "ok";
81
82 linux,part-probe = "bcm63xxpart";
83
84 partitions {
85 compatible = "fixed-partitions";
86 #address-cells = <1>;
87 #size-cells = <1>;
88
89 cfe@0 {
90 label = "CFE";
91 reg = <0x000000 0x020000>;
92 read-only;
93 };
94
95 linux@20000 {
96 label = "linux";
97 reg = <0x020000 0xfc0000>;
98 compatible = "brcm,bcm963xx-imagetag";
99 };
100
101 nvram@fe0000 {
102 label = "nvram";
103 reg = <0xfe0000 0x020000>;
104 };
105 };
106 };
107
108 &uart0 {
109 status = "ok";
110 };