target/linux/brcm63xx/dts/vr-3026e.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend VR-3026e";
   9         compatible = "comtrend,vr-3026e", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 reset {
  23                         label = "reset";
  24                         gpios = <&pinctrl 34 1>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27         };
  28
  29         gpio-leds {
  30                 compatible = "gpio-leds";
  31
  32                 dsl_green {
  33                         label = "VR-3026e:green:dsl";
  34                         gpios = <&pinctrl 2 1>;
  35                 };
  36                 inet_green {
  37                         label = "VR-3026e:green:inet";
  38                         gpios = <&pinctrl 5 0>;
  39                 };
  40                 power_green {
  41                         label = "VR-3026e:green:power";
  42                         gpios = <&pinctrl 22 0>;
  43                         default-state = "on";
  44                 };
  45                 power_red {
  46                         label = "VR-3026e:red:power";
  47                         gpios = <&pinctrl 24 0>;
  48                 };
  49                 inet_red {
  50                         label = "VR-3026e:red:inet";
  51                         gpios = <&pinctrl 31 0>;
  52                 };
  53         };
  54 };
  55
  56 &pflash {
  57         status = "ok";
  58
  59         linux,part-probe = "bcm63xxpart";
  60
  61         cfe@0 {
  62                 label = "CFE";
  63                 reg = <0x000000 0x010000>;
  64                 read-only;
  65         };
  66
  67         linux@10000 {
  68                 label = "linux";
  69                 reg = <0x010000 0x7e0000>;
  70         };
  71
  72         nvram@7f0000 {
  73                 label = "nvram";
  74                 reg = <0x7f0000 0x010000>;
  75         };
  76 };
  77
  78 &pinctrl {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&pinctrl_pci &pinctrl_ephy0_led &pinctrl_ephy1_led
  81                      &pinctrl_ephy2_led &pinctrl_ephy3_led>;
  82 };