target/linux/brcm63xx/dts/wap-5813n.dts

   1 /dts-v1/;
   2
   3 #include "bcm6368.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Comtrend WAP-5813n";
   9         compatible = "comtrend,wap-5813n", "brcm,bcm6368";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 wlan {
  24                         label = "wlan";
  25                         gpios = <&pinctrl 32 1>;
  26                         linux,code = <KEY_WLAN>;
  27                 };
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&pinctrl 34 1>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33                 wps {
  34                         label = "wps";
  35                         gpios = <&pinctrl 35 1>;
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                 };
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42
  43                 inet_green {
  44                         label = "WAP-5813n:green:inet";
  45                         gpios = <&pinctrl 5 0>;
  46                 };
  47                 power_green {
  48                         label = "WAP-5813n:green:power";
  49                         gpios = <&pinctrl 22 0>;
  50                         default-state = "on";
  51                 };
  52                 wps_green {
  53                         label = "WAP-5813n:green:wps";
  54                         gpios = <&pinctrl 23 1>;
  55                 };
  56                 power_red {
  57                         label = "WAP-5813n:red:power";
  58                         gpios = <&pinctrl 24 0>;
  59                 };
  60                 inet_red {
  61                         label = "WAP-5813n:red:inet";
  62                         gpios = <&pinctrl 31 0>;
  63                 };
  64         };
  65 };
  66
  67 &pflash {
  68         status = "ok";
  69
  70         linux,part-probe = "bcm63xxpart";
  71
  72         partitions {
  73                 compatible = "fixed-partitions";
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76
  77                 cfe@0 {
  78                         label = "CFE";
  79                         reg = <0x000000 0x010000>;
  80                         read-only;
  81                 };
  82
  83                 linux@10000 {
  84                         label = "linux";
  85                         reg = <0x010000 0x7e0000>;
  86                         compatible = "brcm,bcm963xx-imagetag";
  87                 };
  88
  89                 nvram@7f0000 {
  90                         label = "nvram";
  91                         reg = <0x7f0000 0x010000>;
  92                 };
  93         };
  94 };
  95
  96 &lsspi {
  97         switch@0 {
  98                 compatible = "brcm,bcm53115";
  99                 reg = <0>;
 100                 spi-max-frequency = <781000>;
 101
 102                 lede,alias = "eth0";
 103
 104                 ports {
 105                         #address-cells = <1>;
 106                         #size-cells = <0>;
 107
 108                         lan@0 {
 109                                 reg = <0>;
 110                                 label = "lan4";
 111                         };
 112
 113                         lan@1 {
 114                                 reg = <1>;
 115                                 label = "lan3";
 116                         };
 117
 118                         lan@2 {
 119                                 reg = <2>;
 120                                 label = "lan2";
 121                         };
 122
 123                         lan@3 {
 124                                 reg = <3>;
 125                                 label = "lan1";
 126                         };
 127
 128                         wan@4 {
 129                                 reg = <4>;
 130                                 label = "wan";
 131                         };
 132
 133                         cpu@5 {
 134                                 reg = <5>;
 135                                 label = "cpu";
 136
 137                                 fixed-link {
 138                                         speed = <1000>;
 139                                         full-duplex;
 140                                         asym-pause;
 141                                         pause;
 142                                 };
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &pinctrl {
 149         pinctrl-names = "default";
 150         pinctrl-0 = <&pinctrl_pci>;
 151 };
 152
 153 &uart0 {
 154         status = "ok";
 155 };