target/linux/brcm63xx/patches-3.10/558-board_AR1004G.patch

   1 From: "mexit@o2.pl" <mexit@o2.pl>
   2 Date: Sun, 24 Nov 2013 21:33:38 +0000
   3 Subject: [PATCH 4/5] brcm63xx: add support for Asmax AR 1004g router
   4
   5 Support for Asmax AR 1004g router
   6
   7 Signed-off-by: Adrian Feliks <mexit@o2.pl>
   8 ---
   9 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
  10 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
  11 @@ -2208,6 +2208,51 @@ static struct board_info __initdata boar
  12         },
  13  };
  14
  15 +static struct board_info __initdata board_96348gw_10_AR1004G = {
  16 +       .name                           = "AR1004G",
  17 +       .expected_cpu_id                = 0x6348,
  18 +
  19 +       .has_uart0                      = 1,
  20 +       .has_enet1                      = 1,
  21 +       .has_pci                        = 1,
  22 +
  23 +       .enet1 = {
  24 +               .has_phy                = 1,
  25 +               .phy_id                 = 0,
  26 +               .force_speed_100        = 1,
  27 +               .force_duplex_full      = 1,
  28 +       },
  29 +
  30 +       .leds = {
  31 +               {
  32 +                       .name           = "AR1004G:green:inet",
  33 +                       .gpio           = 3,
  34 +                       .active_low     = 1,
  35 +               },
  36 +               {
  37 +                       .name           = "AR1004G:green:power",
  38 +                       .gpio           = 0,
  39 +                       .active_low     = 1,
  40 +               },
  41 +               {
  42 +                       .name           = "AR1004G:red:power",
  43 +                       .gpio           = 6,
  44 +                       .active_low     = 1,
  45 +               },
  46 +       },
  47 +
  48 +       .buttons = {
  49 +               {
  50 +                       .desc           = "reset",
  51 +                       .gpio           = 33,
  52 +                       .active_low     = 1,
  53 +                       .type           = EV_KEY,
  54 +                       .code           = KEY_RESTART,
  55 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
  56 +               },
  57 +       },
  58 +};
  59 +
  60  #endif
  61
  62  /*
  63 @@ -4547,6 +4592,7 @@ static const struct board_info __initcon
  64         &board_96348A_122,
  65         &board_CPVA502plus,
  66         &board_96348W3,
  67 +       &board_96348gw_10_AR1004G,
  68  #endif
  69
  70  #ifdef CONFIG_BCM63XX_CPU_6358