brcm63xx: Add support for Comtrend WAP-5813n
[openwrt/openwrt.git] / target / linux / brcm63xx / patches-3.14 / 561-board_WAP-5813n.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -13,6 +13,7 @@
4 #include <linux/gpio_keys.h>
5 #include <linux/input.h>
6 #include <linux/pci_ids.h>
7 +#include <linux/platform_data/b53.h>
8 #include <linux/platform_device.h>
9 #include <linux/spi/spi.h>
10 #include <linux/spi/spi_gpio.h>
11 @@ -4466,6 +4467,99 @@ static struct board_info __initdata boar
12 .has_ohci0 = 1,
13 .has_ehci0 = 1,
14 };
15 +
16 +static struct b53_platform_data WAP5813n_b53_pdata = {
17 + .alias = "eth0",
18 +};
19 +
20 +static struct spi_board_info WAP5813n_spi_devices[] = {
21 + {
22 + .modalias = "b53-switch",
23 + .max_speed_hz = 781000,
24 + .bus_num = 0,
25 + .chip_select = 0,
26 + .platform_data = &WAP5813n_b53_pdata,
27 + }
28 +};
29 +
30 +static struct board_info __initdata board_WAP5813n = {
31 + .name = "96369R-1231N",
32 + .expected_cpu_id = 0x6368,
33 +
34 + .has_uart0 = 1,
35 + .has_pci = 1,
36 + .has_ohci0 = 1,
37 + .has_ehci0 = 1,
38 +
39 + .has_enetsw = 1,
40 + .enetsw = {
41 + .used_ports = {
42 + [4] = {
43 + .used = 1,
44 + .phy_id = 0xff,
45 + .bypass_link = 1,
46 + .force_speed = 1000,
47 + .force_duplex_full = 1,
48 + .name = "RGMII",
49 + },
50 + },
51 + },
52 +
53 + .leds = {
54 + {
55 + .name = "WAP-5813n:green:power",
56 + .gpio = 22,
57 + .default_trigger = "default-on",
58 + },
59 + {
60 + .name = "WAP-5813n:red:power",
61 + .gpio = 24,
62 + },
63 + {
64 + .name = "WAP-5813n:green:inet",
65 + .gpio = 5,
66 + },
67 + {
68 + .name = "WAP-5813n:red:inet",
69 + .gpio = 31,
70 + },
71 + {
72 + .name = "WAP-5813n:green:wps",
73 + .gpio = 23,
74 + .active_low = 1,
75 + },
76 + },
77 +
78 + .buttons = {
79 + {
80 + .desc = "wlan",
81 + .gpio = 32,
82 + .active_low = 1,
83 + .type = EV_KEY,
84 + .code = KEY_WLAN,
85 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
86 + },
87 + {
88 + .desc = "reset",
89 + .gpio = 34,
90 + .active_low = 1,
91 + .type = EV_KEY,
92 + .code = KEY_RESTART,
93 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
94 + },
95 + {
96 + .desc = "wps",
97 + .gpio = 35,
98 + .active_low = 1,
99 + .type = EV_KEY,
100 + .code = KEY_WPS_BUTTON,
101 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
102 + },
103 + },
104 +
105 + .spis = WAP5813n_spi_devices,
106 + .num_spis = ARRAY_SIZE(WAP5813n_spi_devices),
107 +};
108 #endif
109
110 /*
111 @@ -4849,6 +4943,7 @@ static const struct board_info __initcon
112 #ifdef CONFIG_BCM63XX_CPU_6368
113 &board_96368mvwg,
114 &board_96368mvngr,
115 + &board_WAP5813n,
116 #endif
117 #ifdef CONFIG_BCM63XX_CPU_63268
118 &board_963268bu_p300,