target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch

   1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
   2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
   3 @@ -4671,6 +4671,116 @@ static struct board_info __initdata boar
   4         },
   5  };
   6
   7 +static struct sprom_fixup __initdata vr3025un_fixups[] = {
   8 +       { .offset = 97, .value = 0xfeb3 },
   9 +       { .offset = 98, .value = 0x1618 },
  10 +       { .offset = 99, .value = 0xfab0 },
  11 +       { .offset = 113, .value = 0xfed1 },
  12 +       { .offset = 114, .value = 0x1609 },
  13 +       { .offset = 115, .value = 0xfad9 },
  14 +};
  15 +
  16 +static struct board_info __initdata board_VR3025un = {
  17 +       .name                                   = "96368M-1341N",
  18 +       .expected_cpu_id                = 0x6368,
  19 +
  20 +       .has_uart0                              = 1,
  21 +       .has_pci                                = 1,
  22 +       .use_fallback_sprom                     = 1,
  23 +       .has_ohci0                              = 1,
  24 +       .has_ehci0                              = 1,
  25 +
  26 +       .has_enetsw                             = 1,
  27 +       .enetsw = {
  28 +               .used_ports = {
  29 +                       [0] = {
  30 +                               .used           = 1,
  31 +                               .phy_id         = 1,
  32 +                               .name           = "port1",
  33 +                       },
  34 +                       [1] = {
  35 +                               .used           = 1,
  36 +                               .phy_id         = 2,
  37 +                               .name           = "port2",
  38 +                       },
  39 +                       [2] = {
  40 +                               .used           = 1,
  41 +                               .phy_id         = 3,
  42 +                               .name           = "port3",
  43 +                       },
  44 +                       [3] = {
  45 +                               .used           = 1,
  46 +                               .phy_id         = 4,
  47 +                               .name           = "port4",
  48 +                       },
  49 +               },
  50 +       },
  51 +
  52 +       .leds = {
  53 +               {
  54 +                       .name           = "VR-3025un:green:dsl",
  55 +                       .gpio           = 2,
  56 +                       .active_low     = 1,
  57 +               },
  58 +               {
  59 +                       .name           = "VR-3025un:green:inet",
  60 +                       .gpio           = 5,
  61 +               },
  62 +               {
  63 +                       .name           = "VR-3025un:green:lan1",
  64 +                       .gpio           = 6,
  65 +                       .active_low     = 1,
  66 +               },
  67 +               {
  68 +                       .name           = "VR-3025un:green:lan2",
  69 +                       .gpio           = 7,
  70 +                       .active_low     = 1,
  71 +               },
  72 +               {
  73 +                       .name           = "VR-3025un:green:lan3",
  74 +                       .gpio           = 8,
  75 +                       .active_low     = 1,
  76 +               },
  77 +               {
  78 +                       .name           = "VR-3025un:green:iptv",
  79 +                       .gpio           = 9,
  80 +                       .active_low     = 1,
  81 +               },
  82 +               {
  83 +                       .name           = "VR-3025un:green:power",
  84 +                       .gpio           = 22,
  85 +                       .default_trigger = "default-on",
  86 +               },
  87 +               {
  88 +                       .name           = "VR-3025un:red:power",
  89 +                       .gpio           = 24,
  90 +               },
  91 +               {
  92 +                       .name           = "VR-3025un:red:inet",
  93 +                       .gpio           = 31,
  94 +               },
  95 +       },
  96 +
  97 +       .buttons = {
  98 +               {
  99 +                       .desc                   = "reset",
 100 +                       .gpio                   = 34,
 101 +                       .type                   = EV_KEY,
 102 +                       .code                   = KEY_RESTART,
 103 +                       .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
 104 +                       .active_low             = 1,
 105 +               },
 106 +       },
 107 +
 108 +       .fallback_sprom = {
 109 +               .type                           = SPROM_BCM43222,
 110 +               .pci_bus                        = 0,
 111 +               .pci_dev                        = 1,
 112 +               .board_fixups                   = vr3025un_fixups,
 113 +               .num_board_fixups               = ARRAY_SIZE(vr3025un_fixups),
 114 +       },
 115 +};
 116 +
 117  static struct b53_platform_data WAP5813n_b53_pdata = {
 118         .alias = "eth0",
 119  };
 120 @@ -5165,6 +5275,7 @@ static const struct board_info __initcon
 121         &board_96368mvwg,
 122         &board_96368mvngr,
 123         &board_VR3025u,
 124 +       &board_VR3025un,
 125         &board_WAP5813n,
 126  #endif
 127  #ifdef CONFIG_BCM63XX_CPU_63268