brcm63xx: move VG50 to DT
[openwrt/openwrt.git] / target / linux / brcm63xx / patches-3.18 / 564-board_P870HW-51a_v2.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -1807,6 +1807,49 @@ static struct sprom_fixup __initdata vr3
4 { .offset = 115, .value = 0xfad9 },
5 };
6
7 +static struct board_info __initdata board_P870HW51A_V2 = {
8 + .name = "P870HW-51a_v2",
9 + .expected_cpu_id = 0x6368,
10 +
11 + .has_uart0 = 1,
12 + .has_pci = 1,
13 + .use_fallback_sprom = 1,
14 + .has_ohci0 = 1,
15 + .has_ehci0 = 1,
16 +
17 + .has_enetsw = 1,
18 + .enetsw = {
19 + .used_ports = {
20 + [0] = {
21 + .used = 1,
22 + .phy_id = 1,
23 + .name = "port1",
24 + },
25 + [1] = {
26 + .used = 1,
27 + .phy_id = 2,
28 + .name = "port2",
29 + },
30 + [2] = {
31 + .used = 1,
32 + .phy_id = 3,
33 + .name = "port3",
34 + },
35 + [3] = {
36 + .used = 1,
37 + .phy_id = 4,
38 + .name = "port4",
39 + },
40 + },
41 + },
42 +
43 + .fallback_sprom = {
44 + .type = SPROM_BCM4318,
45 + .pci_bus = 0,
46 + .pci_dev = 1,
47 + },
48 +};
49 +
50 static struct board_info __initdata board_VR3025u = {
51 .name = "96368M-1541N",
52 .expected_cpu_id = 0x6368,
53 @@ -2223,6 +2266,7 @@ static const struct board_info __initcon
54 #ifdef CONFIG_BCM63XX_CPU_6368
55 &board_96368mvwg,
56 &board_96368mvngr,
57 + &board_P870HW51A_V2,
58 &board_VR3025u,
59 &board_VR3025un,
60 &board_WAP5813n,
61 @@ -2317,6 +2361,7 @@ static struct of_device_id const bcm963x
62 { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
63 { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
64 { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
65 + { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
66 #endif
67 #ifdef CONFIG_BCM63XX_CPU_63268
68 { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },