target/linux/generic-2.4/files/crypto/ocf/kirkwood/mvHal/mvSysHwConfig.h

   1 /*******************************************************************************
   2 Copyright (C) Marvell International Ltd. and its affiliates
   3
   4 ********************************************************************************
   5 Marvell GPL License Option
   6
   7 If you received this File from Marvell, you may opt to use, redistribute and/or
   8 modify this File in accordance with the terms and conditions of the General
   9 Public License Version 2, June 1991 (the "GPL License"), a copy of which is
  10 available along with the File in the license.txt file or by writing to the Free
  11 Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
  12 on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
  13
  14 THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
  15 WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
  16 DISCLAIMED.  The GPL License provides additional details about this warranty
  17 disclaimer.
  18
  19 *******************************************************************************/
  20 /*******************************************************************************
  21 * mvSysHwCfg.h - Marvell system HW configuration file
  22 *
  23 * DESCRIPTION:
  24 *       None.
  25 *
  26 * DEPENDENCIES:
  27 *       None.
  28 *
  29 *******************************************************************************/
  30
  31 #ifndef __INCmvSysHwConfigh
  32 #define __INCmvSysHwConfigh
  33
  34 #include "../../../../include/linux/autoconf.h"
  35
  36 #define CONFIG_MARVELL  1
  37
  38 /* includes */
  39 #define _1K         0x00000400
  40 #define _4K         0x00001000
  41 #define _8K         0x00002000
  42 #define _16K        0x00004000
  43 #define _32K        0x00008000
  44 #define _64K        0x00010000
  45 #define _128K       0x00020000
  46 #define _256K       0x00040000
  47 #define _512K       0x00080000
  48
  49 #define _1M         0x00100000
  50 #define _2M         0x00200000
  51 #define _4M         0x00400000
  52 #define _8M         0x00800000
  53 #define _16M        0x01000000
  54 #define _32M        0x02000000
  55 #define _64M        0x04000000
  56 #define _128M       0x08000000
  57 #define _256M       0x10000000
  58 #define _512M       0x20000000
  59
  60 #define _1G         0x40000000
  61 #define _2G         0x80000000
  62
  63 /****************************************/
  64 /* Soc supporeted Units definitions     */
  65 /****************************************/
  66
  67 #ifdef CONFIG_MV_INCLUDE_PEX
  68 #define MV_INCLUDE_PEX
  69 #endif
  70 #ifdef CONFIG_MV_INCLUDE_TWSI
  71 #define MV_INCLUDE_TWSI
  72 #endif
  73 #ifdef CONFIG_MV_INCLUDE_CESA
  74 #define MV_INCLUDE_CESA
  75 #endif
  76 #ifdef CONFIG_MV_INCLUDE_GIG_ETH
  77 #define MV_INCLUDE_GIG_ETH
  78 #endif
  79 #ifdef CONFIG_MV_INCLUDE_INTEG_SATA
  80 #define MV_INCLUDE_INTEG_SATA
  81 #define MV_INCLUDE_SATA
  82 #endif
  83 #ifdef CONFIG_MV_INCLUDE_USB
  84 #define MV_INCLUDE_USB
  85 #define MV_USB_VOLTAGE_FIX
  86 #endif
  87 #ifdef CONFIG_MV_INCLUDE_NAND
  88 #define MV_INCLUDE_NAND
  89 #endif
  90 #ifdef CONFIG_MV_INCLUDE_TDM
  91 #define MV_INCLUDE_TDM
  92 #endif
  93 #ifdef CONFIG_MV_INCLUDE_XOR
  94 #define MV_INCLUDE_XOR
  95 #endif
  96 #ifdef CONFIG_MV_INCLUDE_TWSI
  97 #define MV_INCLUDE_TWSI
  98 #endif
  99 #ifdef CONFIG_MV_INCLUDE_UART
 100 #define MV_INCLUDE_UART
 101 #endif
 102 #ifdef CONFIG_MV_INCLUDE_SPI
 103 #define MV_INCLUDE_SPI
 104 #endif
 105 #ifdef CONFIG_MV_INCLUDE_SFLASH_MTD
 106 #define MV_INCLUDE_SFLASH_MTD
 107 #endif
 108 #ifdef CONFIG_MV_INCLUDE_AUDIO
 109 #define MV_INCLUDE_AUDIO
 110 #endif
 111 #ifdef CONFIG_MV_INCLUDE_TS
 112 #define MV_INCLUDE_TS
 113 #endif
 114 #ifdef CONFIG_MV_INCLUDE_SDIO
 115 #define MV_INCLUDE_SDIO
 116 #endif
 117
 118
 119 /* NAND flash stuff */
 120 #ifdef CONFIG_MV_NAND_BOOT
 121 #define MV_NAND_BOOT
 122 #endif
 123 #ifdef CONFIG_MV_NAND
 124 #define MV_NAND
 125 #endif
 126
 127 /* SPI flash stuff */
 128 #ifdef CONFIG_MV_SPI_BOOT
 129 #define MV_SPI_BOOT
 130 #endif
 131
 132
 133 /****************************************************************/
 134 /************* General    configuration ********************/
 135 /****************************************************************/
 136
 137 /* Enable Clock Power Control */
 138 #define MV_INCLUDE_CLK_PWR_CNTRL
 139
 140 /* Disable the DEVICE BAR in the PEX */
 141 #define MV_DISABLE_PEX_DEVICE_BAR
 142
 143 /* Allow the usage of early printings during initialization */
 144 #define MV_INCLUDE_EARLY_PRINTK
 145
 146 /****************************************************************/
 147 /************* NFP configuration ********************************/
 148 /****************************************************************/
 149 #define MV_NFP_SEC_Q_SIZE               64
 150 #define MV_NFP_SEC_REQ_Q_SIZE           1000
 151
 152
 153
 154 /****************************************************************/
 155 /************* CESA configuration ********************/
 156 /****************************************************************/
 157
 158 #ifdef MV_INCLUDE_CESA
 159
 160 #define MV_CESA_MAX_CHAN               4
 161
 162 /* Use 2K of SRAM */
 163 #define MV_CESA_MAX_BUF_SIZE           1600
 164
 165 #endif /* MV_INCLUDE_CESA */
 166
 167 #if defined(CONFIG_MV_INCLUDE_GIG_ETH)
 168
 169 #ifdef CONFIG_MV_NFP_STATS
 170 #define MV_FP_STATISTICS
 171 #else
 172 #undef MV_FP_STATISTICS
 173 #endif
 174 /* Default configuration for SKB_REUSE: 0 - Disabled, 1 - Enabled */
 175 #define MV_ETH_SKB_REUSE_DEFAULT    1
 176 /* Default configuration for TX_EN workaround: 0 - Disabled, 1 - Enabled */
 177 #define MV_ETH_TX_EN_DEFAULT        0
 178
 179 /* un-comment if you want to perform tx_done from within the poll function */
 180 /* #define ETH_TX_DONE_ISR */
 181
 182 /* put descriptors in uncached memory */
 183 /* #define ETH_DESCR_UNCACHED */
 184
 185 /* Descriptors location: DRAM/internal-SRAM */
 186 #define ETH_DESCR_IN_SDRAM
 187 #undef  ETH_DESCR_IN_SRAM    /* No integrated SRAM in 88Fxx81 devices */
 188
 189 #if defined(ETH_DESCR_IN_SRAM)
 190 #if defined(ETH_DESCR_UNCACHED)
 191  #define ETH_DESCR_CONFIG_STR    "Uncached descriptors in integrated SRAM"
 192 #else
 193  #define ETH_DESCR_CONFIG_STR    "Cached descriptors in integrated SRAM"
 194 #endif
 195 #elif defined(ETH_DESCR_IN_SDRAM)
 196 #if defined(ETH_DESCR_UNCACHED)
 197  #define ETH_DESCR_CONFIG_STR    "Uncached descriptors in DRAM"
 198 #else
 199  #define ETH_DESCR_CONFIG_STR    "Cached descriptors in DRAM"
 200 #endif
 201 #else
 202  #error "Ethernet descriptors location undefined"
 203 #endif /* ETH_DESCR_IN_SRAM or ETH_DESCR_IN_SDRAM*/
 204
 205 /* SW Sync-Barrier: not relevant for 88fxx81*/
 206 /* Reasnable to define this macro when descriptors in SRAM and buffers in DRAM */
 207 /* In RX the CPU theoretically might see himself as the descriptor owner,      */
 208 /* although the buffer hadn't been written to DRAM yet. Performance cost.      */
 209 /* #define INCLUDE_SYNC_BARR */
 210
 211 /* Buffers cache coherency method (buffers in DRAM) */
 212 #ifndef MV_CACHE_COHER_SW
 213 /* Taken from mvCommon.h */
 214 /* Memory uncached, HW or SW cache coherency is not needed */
 215 #define MV_UNCACHED             0
 216 /* Memory cached, HW cache coherency supported in WriteThrough mode */
 217 #define MV_CACHE_COHER_HW_WT    1
 218 /* Memory cached, HW cache coherency supported in WriteBack mode */
 219 #define MV_CACHE_COHER_HW_WB    2
 220 /* Memory cached, No HW cache coherency, Cache coherency must be in SW */
 221 #define MV_CACHE_COHER_SW       3
 222
 223 #endif
 224
 225 /* DRAM cache coherency configuration */
 226 #define MV_CACHE_COHERENCY  MV_CACHE_COHER_SW
 227
 228
 229 #define ETHER_DRAM_COHER    MV_CACHE_COHER_SW   /* No HW coherency in 88Fxx81 devices */
 230
 231 #if (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WB)
 232  #define ETH_SDRAM_CONFIG_STR    "DRAM HW cache coherency (write-back)"
 233 #elif (ETHER_DRAM_COHER == MV_CACHE_COHER_HW_WT)
 234  #define ETH_SDRAM_CONFIG_STR    "DRAM HW cache coherency (write-through)"
 235 #elif (ETHER_DRAM_COHER == MV_CACHE_COHER_SW)
 236  #define ETH_SDRAM_CONFIG_STR    "DRAM SW cache-coherency"
 237 #elif (ETHER_DRAM_COHER == MV_UNCACHED)
 238 #   define ETH_SDRAM_CONFIG_STR  "DRAM uncached"
 239 #else
 240  #error "Ethernet-DRAM undefined"
 241 #endif /* ETHER_DRAM_COHER */
 242
 243
 244 /****************************************************************/
 245 /************* Ethernet driver configuration ********************/
 246 /****************************************************************/
 247
 248 /* port's default queueus */
 249 #define ETH_DEF_TXQ         0
 250 #define ETH_DEF_RXQ         0
 251
 252 #define MV_ETH_RX_Q_NUM     CONFIG_MV_ETH_RX_Q_NUM
 253 #define MV_ETH_TX_Q_NUM     CONFIG_MV_ETH_TX_Q_NUM
 254
 255 /* interrupt coalescing setting */
 256 #define ETH_TX_COAL                 200
 257 #define ETH_RX_COAL                 200
 258
 259 /* Checksum offloading */
 260 #define TX_CSUM_OFFLOAD
 261 #define RX_CSUM_OFFLOAD
 262
 263 #endif /* CONFIG_MV_INCLUDE_GIG_ETH */
 264
 265 /****************************************************************/
 266 /*************** Telephony configuration ************************/
 267 /****************************************************************/
 268 #if defined(CONFIG_MV_TDM_LINEAR_MODE)
 269  #define MV_TDM_LINEAR_MODE
 270 #elif defined(CONFIG_MV_TDM_ULAW_MODE)
 271  #define MV_TDM_ULAW_MODE
 272 #endif
 273
 274 #if defined(CONFIG_MV_TDM_5CHANNELS)
 275  #define MV_TDM_5CHANNELS
 276 #endif
 277
 278 #if defined(CONFIG_MV_TDM_USE_EXTERNAL_PCLK_SOURCE)
 279  #define MV_TDM_USE_EXTERNAL_PCLK_SOURCE
 280 #endif
 281
 282 /* We use the following registers to store DRAM interface pre configuration   */
 283 /* auto-detection results                                                                                                         */
 284 /* IMPORTANT: We are using mask register for that purpose. Before writing     */
 285 /* to units mask register, make sure main maks register is set to disable     */
 286 /* all interrupts.                                                            */
 287 #define DRAM_BUF_REG0   0x30810 /* sdram bank 0 size            */
 288 #define DRAM_BUF_REG1   0x30820 /* sdram config                 */
 289 #define DRAM_BUF_REG2   0x30830 /* sdram mode                   */
 290 #define DRAM_BUF_REG3   0x308c4 /* dunit control low            */
 291 #define DRAM_BUF_REG4   0x60a90 /* sdram address control        */
 292 #define DRAM_BUF_REG5   0x60a94 /* sdram timing control low     */
 293 #define DRAM_BUF_REG6   0x60a98 /* sdram timing control high    */
 294 #define DRAM_BUF_REG7   0x60a9c /* sdram ODT control low        */
 295 #define DRAM_BUF_REG8   0x60b90 /* sdram ODT control high       */
 296 #define DRAM_BUF_REG9   0x60b94 /* sdram Dunit ODT control      */
 297 #define DRAM_BUF_REG10  0x60b98 /* sdram Extended Mode          */
 298 #define DRAM_BUF_REG11  0x60b9c /* sdram Ddr2 Time Low Reg      */
 299 #define DRAM_BUF_REG12  0x60a00 /* sdram Ddr2 Time High Reg     */
 300 #define DRAM_BUF_REG13  0x60a04 /* dunit Ctrl High              */
 301 #define DRAM_BUF_REG14  0x60b00 /* sdram second DIMM exist      */
 302
 303 /* Following the pre-configuration registers default values restored after    */
 304 /* auto-detection is done                                                     */
 305 #define DRAM_BUF_REG_DV 0
 306
 307 /* System Mapping */
 308 #define SDRAM_CS0_BASE  0x00000000
 309 #define SDRAM_CS0_SIZE  _256M
 310
 311 #define SDRAM_CS1_BASE  0x10000000
 312 #define SDRAM_CS1_SIZE  _256M
 313
 314 #define SDRAM_CS2_BASE  0x20000000
 315 #define SDRAM_CS2_SIZE  _256M
 316
 317 #define SDRAM_CS3_BASE  0x30000000
 318 #define SDRAM_CS3_SIZE  _256M
 319
 320 /* PEX */
 321 #define PEX0_MEM_BASE 0xe8000000
 322 #define PEX0_MEM_SIZE _128M
 323
 324 #define PEX0_IO_BASE 0xf2000000
 325 #define PEX0_IO_SIZE _1M
 326
 327 /* Device Chip Selects */
 328 #define NFLASH_CS_BASE 0xfa000000
 329 #define NFLASH_CS_SIZE _2M
 330
 331 #define SPI_CS_BASE 0xf4000000
 332 #define SPI_CS_SIZE _16M
 333
 334 #define CRYPT_ENG_BASE  0xf0000000
 335 #define CRYPT_ENG_SIZE  _2M
 336
 337 #define BOOTDEV_CS_BASE 0xff800000
 338 #define BOOTDEV_CS_SIZE _8M
 339
 340 /* CS2 - BOOTROM */
 341 #define DEVICE_CS2_BASE 0xff900000
 342 #define DEVICE_CS2_SIZE _1M
 343
 344 /* PEX Work arround */
 345 /* the target we will use for the workarround */
 346 #define PEX_CONFIG_RW_WA_TARGET PEX0_MEM
 347 /*a flag that indicates if we are going to use the
 348 size and base of the target we using for the workarround
 349 window */
 350 #define PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES 1
 351 /* if the above flag is 0 then the following values
 352 will be used for the workarround window base and size,
 353 otherwise the following defines will be ignored */
 354 #define PEX_CONFIG_RW_WA_BASE 0xF3000000
 355 #define PEX_CONFIG_RW_WA_SIZE _16M
 356
 357 /* Internal registers: size is defined in Controllerenvironment */
 358 #define INTER_REGS_BASE 0xFEE00000
 359
 360 /* DRAM detection stuff */
 361 #define MV_DRAM_AUTO_SIZE
 362
 363 /* Board clock detection */
 364 #define TCLK_AUTO_DETECT        /* Use Tclk auto detection   */
 365 #define SYSCLK_AUTO_DETECT      /* Use SysClk auto detection */
 366 #define PCLCK_AUTO_DETECT       /* Use PClk auto detection   */
 367 #define L2CLK_AUTO_DETECT       /* Use L2Clk auto detection   */
 368
 369 /* PEX-PCI\PCI-PCI Bridge*/
 370 #define PCI0_IF_PTP             0               /* Bridge exist on pciIf0*/
 371
 372
 373
 374 #endif /* __INCmvSysHwConfigh */
 375