target/linux/generic/hack-5.4/700-swconfig_switch_drivers.patch

   1 From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
   2 From: Felix Fietkau <nbd@nbd.name>
   3 Date: Fri, 7 Jul 2017 17:24:23 +0200
   4 Subject: net: swconfig: adds openwrt switch layer
   5
   6 Signed-off-by: Felix Fietkau <nbd@nbd.name>
   7 ---
   8  drivers/net/phy/Kconfig   | 83 +++++++++++++++++++++++++++++++++++++++++++++++
   9  drivers/net/phy/Makefile  | 15 +++++++++
  10  include/uapi/linux/Kbuild |  1 +
  11  3 files changed, 99 insertions(+)
  12
  13 --- a/drivers/net/phy/Kconfig
  14 +++ b/drivers/net/phy/Kconfig
  15 @@ -249,6 +249,89 @@ config LED_TRIGGER_PHY
  16                 for any speed known to the PHY.
  17
  18
  19 +comment "Switch configuration API + drivers"
  20 +
  21 +config SWCONFIG
  22 +       tristate "Switch configuration API"
  23 +       ---help---
  24 +         Switch configuration API using netlink. This allows
  25 +         you to configure the VLAN features of certain switches.
  26 +
  27 +config SWCONFIG_LEDS
  28 +       bool "Switch LED trigger support"
  29 +       depends on (SWCONFIG && LEDS_TRIGGERS)
  30 +
  31 +config ADM6996_PHY
  32 +       tristate "Driver for ADM6996 switches"
  33 +       select SWCONFIG
  34 +       ---help---
  35 +         Currently supports the ADM6996FC and ADM6996M switches.
  36 +         Support for FC is very limited.
  37 +
  38 +config AR8216_PHY
  39 +       tristate "Driver for Atheros AR8216 switches"
  40 +       select ETHERNET_PACKET_MANGLE
  41 +       select SWCONFIG
  42 +
  43 +config AR8216_PHY_LEDS
  44 +       bool "Atheros AR8216 switch LED support"
  45 +       depends on (AR8216_PHY && LEDS_CLASS)
  46 +
  47 +source "drivers/net/phy/b53/Kconfig"
  48 +
  49 +config IP17XX_PHY
  50 +       tristate "Driver for IC+ IP17xx switches"
  51 +       select SWCONFIG
  52 +
  53 +config MVSWITCH_PHY
  54 +       tristate "Driver for Marvell 88E6060 switches"
  55 +       select ETHERNET_PACKET_MANGLE
  56 +
  57 +config MVSW61XX_PHY
  58 +       tristate "Driver for Marvell 88E6171/6172 switches"
  59 +       select SWCONFIG
  60 +
  61 +config PSB6970_PHY
  62 +       tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
  63 +       select SWCONFIG
  64 +       select ETHERNET_PACKET_MANGLE
  65 +
  66 +config RTL8306_PHY
  67 +       tristate "Driver for Realtek RTL8306S switches"
  68 +       select SWCONFIG
  69 +
  70 +config RTL8366_SMI
  71 +       tristate "Driver for the RTL8366 SMI interface"
  72 +       depends on GPIOLIB
  73 +       ---help---
  74 +         This module implements the SMI interface protocol which is used
  75 +         by some RTL8366 ethernet switch devices via the generic GPIO API.
  76 +
  77 +if RTL8366_SMI
  78 +
  79 +config RTL8366_SMI_DEBUG_FS
  80 +       bool "RTL8366 SMI interface debugfs support"
  81 +        depends on DEBUG_FS
  82 +        default n
  83 +
  84 +config RTL8366S_PHY
  85 +       tristate "Driver for the Realtek RTL8366S switch"
  86 +       select SWCONFIG
  87 +
  88 +config RTL8366RB_PHY
  89 +       tristate "Driver for the Realtek RTL8366RB switch"
  90 +       select SWCONFIG
  91 +
  92 +config RTL8367_PHY
  93 +       tristate "Driver for the Realtek RTL8367R/M switches"
  94 +       select SWCONFIG
  95 +
  96 +config RTL8367B_PHY
  97 +       tristate "Driver fot the Realtek RTL8367R-VB switch"
  98 +       select SWCONFIG
  99 +
 100 +endif # RTL8366_SMI
 101 +
 102  comment "MII PHY device drivers"
 103
 104  config SFP
 105 --- a/drivers/net/phy/Makefile
 106 +++ b/drivers/net/phy/Makefile
 107 @@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY)     += phy_
 108  obj-$(CONFIG_PHYLINK)          += phylink.o
 109  obj-$(CONFIG_PHYLIB)           += libphy.o
 110
 111 +obj-$(CONFIG_SWCONFIG)         += swconfig.o
 112 +obj-$(CONFIG_ADM6996_PHY)      += adm6996.o
 113 +obj-$(CONFIG_AR8216_PHY)       += ar8216.o ar8327.o
 114 +obj-$(CONFIG_SWCONFIG_B53)     += b53/
 115 +obj-$(CONFIG_IP17XX_PHY)       += ip17xx.o
 116 +obj-$(CONFIG_MVSWITCH_PHY)     += mvswitch.o
 117 +obj-$(CONFIG_MVSW61XX_PHY)     += mvsw61xx.o
 118 +obj-$(CONFIG_PSB6970_PHY)      += psb6970.o
 119 +obj-$(CONFIG_RTL8306_PHY)      += rtl8306.o
 120 +obj-$(CONFIG_RTL8366_SMI)      += rtl8366_smi.o
 121 +obj-$(CONFIG_RTL8366S_PHY)     += rtl8366s.o
 122 +obj-$(CONFIG_RTL8366RB_PHY)    += rtl8366rb.o
 123 +obj-$(CONFIG_RTL8367_PHY)      += rtl8367.o
 124 +obj-$(CONFIG_RTL8367B_PHY)     += rtl8367b.o
 125 +
 126  obj-$(CONFIG_MDIO_ASPEED)      += mdio-aspeed.o
 127  obj-$(CONFIG_MDIO_BCM_IPROC)   += mdio-bcm-iproc.o
 128  obj-$(CONFIG_MDIO_BCM_UNIMAC)  += mdio-bcm-unimac.o
 129 --- a/include/linux/platform_data/b53.h
 130 +++ b/include/linux/platform_data/b53.h
 131 @@ -29,6 +29,9 @@ struct b53_platform_data {
 132         u32 chip_id;
 133         u16 enabled_ports;
 134
 135 +       /* allow to specify an ethX alias */
 136 +       const char *alias;
 137 +
 138         /* only used by MMAP'd driver */
 139         unsigned big_endian:1;
 140         void __iomem *regs;